LeCroy Oscilloscope, Digital Storage, 2 Channels, 100MHz

Wetgeving en compliance
Land van herkomst: CN

Teledyne LeCroy T3DSO1000 Series Digital Oscilloscopes

Oscilloscopes are tools used by engineers, designers, and technicians to analyze and measure complicated electronic signals. Oscilloscopes enable you to develop and verify high-performance systems and electronic designs. They are an indispensable tool in any workshop, laboratory or test station.

The Teledyne LeCroy T3DSO1000 series of Oscilloscopes are available with either two channels or four channel models. The two-channel model is available with 100 MHz analogue bandwidth, a single ADC with a 1 GSa/s maximum sample rate, and a single memory module with 14 Mpts of sample memory. The four-channel scope is available in 100 and 200 MHz models and incorporates two 1 GSa/s ADCs and two 14 Mpts memory modules. When all channels are enabled, each channel has sample rate of 500 MSa/s and a standard record length of 7 Mpts. When only a single channel per ADC is active, the maximum sample rate is 1 GSa/s and the maximum record length is 14 Mpts.

The T3DSO1000 series employs a new generation of high speed display technology that provides excellent signal clarity, fidelity and performance. The system noise floor is also lower than similar products in the industry. It comes with a minimum vertical input range of 500 uV/div, an innovative digital trigger system with high sensitivity and low jitter, and a waveform capture rate of 400,000 frames/sec (sequence mode). The T3DSO1000 also employs a 256-level intensity grading display function and a colour temperature display mode not found in other models in this class. Another powerful addition is the new 1 million-point FFT math function that gives the T3DSO1000 very high frequency resolution when observing signal spectra. The new digital design also includes a hardware co-processor that delivers measurements quickly and accurately without slowing acquisition and front-panel response.


Features and Benefits

• 100 MHz bandwidth model
• one 1 GSa/s ADC. When all channels are enabled, each channel has a maximum sample rate of 500 MSa/s. When a single channel per ADC is active, it has a sample rate of 1 GSa/s
• 7in bright TFT LCD (800 x 480) display
• Long memory up to 7Mpts/Ch (14Mpts interleaved)
• Serial bus trigger and decode options of I2C, SPI, UART, RS232, CAN, LIN that enables the users to debug serial buses directly to their oscilloscope
• Waveform capture rate up to 100,000 wfm/s (normal mode), and 400,000 wfm/s (sequence mode)
• Advanced trigger of edge, slope, pulse width, window, runt, interval, time out (Dropout), pattern and video
• It has connectivity of USB for mass storage, printing and PC control, plus LAN that enables fast export of data and screenshots for external analysis and reporting purposes
• Supports 256-level intensity grading and color display modes
• Intelligent trigger: Edge, Slope, Pulse Width, Window, Runt, Interval, Time out (Dropout), Pattern""


Digital oscilloscopes are used in a wide array of applications in a multitude of different industries. The oscilloscope is a vital piece of equipment for any professional who is designing, testing or repairing electronic equipment. Some of the most common are;

• Education
• Electronic design
• Medical researchers
• Television repair technicians
• Physicists
• Testing or repairing electronic equipment
• Data analysis
• Waveform analysis

Why Teledyne LeCroy?

Teledyne LeCroy oscilloscopes and probes have been designed, manufactured and tested to the highest standards. This ensures high reliability and quality. In the unlikely event, you experience any problems all Teledyne LeCroy digital oscilloscopes are covered by a 3-year manufactures warranty and probes a 1-year warranty.

Q: Are there any accessories available?

  • 177-1272 is for the T3DSO1000-FG AWG Software
  • 177-1269 is for the T3DSO1000-MSO 16 Channel MSO Software

  • 177-1274 is for the T3DS01000-WIFI – WIFI Software

  • 177-1275 is for the T3PP300 is for the passive probe @ 300 MHz bandwidth

LeCroy Digital Oscilloscopes

Kenmerk Waarde
Number of Channels 2
Bandwidth 100MHz
Oscilloscope Type Digital Storage
Calibrated RSCAL
Power Source Mains
Display Type TFT LCD
Screen Size 7in
Sample Rate Random 1 Gsps
Model Number p T3DSO1102
1 op voorraad - levertijd is 1 werkdag(en) plus 1 dag extra in verband met gekalibreerd artikel. Gekalibreerde producten kunnen niet worden geretourneerd.
Prijs Each
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 716,50
Related Products
MDO3000 oscilloscopes are designed to meet users' needs ...
MDO3000 oscilloscopes are designed to meet users' needs and aspirations now and into the future. Each model is multi-functional with integrated basic spectrum analyzer, Wave Inspector Navigation, MSO, serial and parallel bus triggering and analysis, and digital voltmeter. Optional instrument ...
RS Pro IDS-6000-U Series offers a 5.7 inch ...
RS Pro IDS-6000-U Series offers a 5.7 inch colour TFT LCD, dual sampling modes, 4 kpts record length, real-time sampling rate of 250 MSa/s and ET sampling rate of 25 GSa/s. It is designed to optimise balance of performance between ...
RS Pro IDS6000A-U Series provides complete remote control ...
RS Pro IDS6000A-U Series provides complete remote control or data capture over a USB interface. It supports PictBridge which, connected to a compatible printer with a USB cable, facilitates push-button printing. Its MemoryPrime technology allows 2 Mpts of waveform data. ...
RS Pro IDS-1000B Series digital storage oscilloscopes are ...
RS Pro IDS-1000B Series digital storage oscilloscopes are general purpose instruments which include exceptional features for a great-value price. They are equipped with Visual Persistence Oscilloscope (VPO) technology. This uses a high-density IC for hardware acceleration to transfer all the ...