RS PRO Durometer

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

RS Pro Digital Shore A Durometer

RS Pro Digital Shore A Durometer provides a fast method of testing hardness on rubbers, plastics, leathers and other soft materials. This pocket sized digital durometer is high quality, durable and provide a fast and convenient method of measuring.

Features and Benefits

Fast and convenient method of measuring.
Large Digit Size: 14 mm
3 Button Control: ON/OFF, HOLD, ZERO
Power: 1 x Lithium CR 2032 – 3 V Battery
Manufactured to comply with BS ISO 7691-1:2004

Supplied with

Fitted case with check block

Parallels, Surface Finish & Hardness

Surface Finish

Any machined component has a surface geometry which consists of three basic elements:

Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)

Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

Specificaties
Kenmerk Waarde
Tester Type Durometer
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
224,66
(excl. BTW)
271,84
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 224,66
Related Products
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
A compact hand held durometer with drag indicator. ...
Description:
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage. • Measurement of penetration (Shore).
This has reference plates manufactured from electro-formed solid ...
Description:
This has reference plates manufactured from electro-formed solid nickel, which give improved wear characteristics and definition of surface finish. It is invaluable for tactile and visual inspection of machined component finish. Metric Ra and imperial AA samples are included. Supplied ...
Surface Finish. HB Series hardness tester with slave ...
Description:
Surface Finish. HB Series hardness tester with slave pointer for measuring penetration depthShore A: rubber, elastomer, neoprene rubber, silicon rubber, vinyl, soft plastics, felt, natural leather and similar materialsShore C/0: foam, spongeShore D: plastics, synthetic resin, resopal, epoxide, perspex etc.Max. ...