RS PRO Durometer

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: DE
Productomschrijving

Durometer

A mechanical Durometer for measurement of the hardness value of elastomeric materials.

Shore A (range 1-100)
"Maximum reading" pointer fitted to dial
Indicator test piece supplied
Manufactured to DIN53505 and ASTM D2240

Supplied with

a protective storage case

Parallels, Surface Finish & Hardness

Surface Finish

Any machined component has a surface geometry which consists of three basic elements:

Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)

Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

Specificaties
Kenmerk Waarde
Tester Type Durometer
15 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
296,58
(excl. BTW)
358,86
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 296,58
Related Products
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
A compact hand held durometer with drag indicator. ...
Description:
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage. • Measurement of penetration (Shore).
This has reference plates manufactured from electro-formed solid ...
Description:
This has reference plates manufactured from electro-formed solid nickel, which give improved wear characteristics and definition of surface finish. It is invaluable for tactile and visual inspection of machined component finish. Metric Ra and imperial AA samples are included. Supplied ...
Surface Finish. HB Series hardness tester with slave ...
Description:
Surface Finish. HB Series hardness tester with slave pointer for measuring penetration depthShore A: rubber, elastomer, neoprene rubber, silicon rubber, vinyl, soft plastics, felt, natural leather and similar materialsShore C/0: foam, spongeShore D: plastics, synthetic resin, resopal, epoxide, perspex etc.Max. ...