Sauter HBA 100-0. Durometer

  • RS-stocknr. 685-0937
  • Fabrikantnummer HBA 100-0.
  • Fabrikant Sauter
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: CN
Productomschrijving

Sauter Hardness Meter

The Sauter hardness meter is an analogue shore a tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'. It is suitable for use with rubber, elastomers, neoprene, silicone, vinyl, soft plastic, felt leather and similar materials.

Features and Benefits

Auto OFF function to preserve the batteries
Compact handheld durometer with a drag indicator
Maximum precision is 3%
Particularly recommended for internal comparison measurement
Maximu mode holds the maximum value taken on the display
Point mode shows one instant value
Operating temperature ranges between 0°C and 40°C

Specificaties
Kenmerk Waarde
Tester Type Durometer
69 op voorraad - levertijd is 1 werkdag(en)
Prijs Each
110,25
(excl. BTW)
133,40
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 110,25
Related Products
RS Pro adjustable parallel set, used for checking, ...
Description:
RS Pro adjustable parallel set, used for checking, marking or positioning work. Consist of two precision ground pieces which slide smoothly on each other. Parallels consist of 2 piece dove tailed together Locked in place by set screwsCan be set ...
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
This has reference plates manufactured from electro-formed solid ...
Description:
This has reference plates manufactured from electro-formed solid nickel, which give improved wear characteristics and definition of surface finish. It is invaluable for tactile and visual inspection of machined component finish. Metric Ra and imperial AA samples are included. Supplied ...
Surface Finish. Sets contain matched pairs of parallelsAll ...
Description:
Surface Finish. Sets contain matched pairs of parallelsAll parallels are hardened and precision groundParallelism accuracy 0.0002inMatched pair accuracy 0.0003in.