Mitutoyo 811-334-10 Durometer

  • RS-stocknr. 795-9965
  • Fabrikantnummer 811-334-10
  • Fabrikant Mitutoyo
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: JP
Productomschrijving

HARDMATIC Durometer

Professional analogue and digital durometers designed to test a range of different materials.

SR44 Battery.

Parallels, Surface Finish & Hardness

Surface Finish

Any machined component has a surface geometry which consists of three basic elements:

Form or Curvature - Whether the surface has irregular bumps or dimensional changes
Waviness - Whether the surface has regular repetitive ripples or patterns (e.g. milling patterns)
Roughness - The shapes or irregularities that are smaller than, and form part of the waviness pattern (e.g. material micro-structure)

Waviness and roughness are traditionally the most difficult elements to measure when comparing surface finish, however, they have a radical effect on the performance of the finished component. Variations will cause aesthetic appearance changes, component wear variations, oil retention variation etc. Many manufacturers therefore specify a range of roughness values which their components should be manufactured to, often expressed as: Ra, Rq (RMS), RzDIN, Ry, Sm,mm.

Specificaties
Kenmerk Waarde
Tester Type Durometer
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 05-11-2019, met een levertijd van 2 à 3 werkdagen.
Prijs Each
Was € 1.484,90
1.338,69
(excl. BTW)
1.619,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 1.338,69
Related Products
Kern Ultrasound hardness testing device is ideally suited ...
Description:
Kern Ultrasound hardness testing device is ideally suited for mobile hardness testing, where the main emphasis is on obtaining rapid and precise results. The SAUTER HO measures using a Vickers Diamond tip, which is pressed into the test piece with ...
A compact hand held durometer with drag indicator. ...
Description:
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage. • Measurement of penetration (Shore).
This has reference plates manufactured from electro-formed solid ...
Description:
This has reference plates manufactured from electro-formed solid nickel, which give improved wear characteristics and definition of surface finish. It is invaluable for tactile and visual inspection of machined component finish. Metric Ra and imperial AA samples are included. Supplied ...
Surface Finish. HB Series hardness tester with slave ...
Description:
Surface Finish. HB Series hardness tester with slave pointer for measuring penetration depthShore A: rubber, elastomer, neoprene rubber, silicon rubber, vinyl, soft plastics, felt, natural leather and similar materialsShore C/0: foam, spongeShore D: plastics, synthetic resin, resopal, epoxide, perspex etc.Max. ...