M80-0130005 HARWIN Datamate Female Crimp Terminal Contact 24AWG

  • RS-stocknr. 173-0923
  • Fabrikantnummer M80-0130005
  • Fabrikant HARWIN
Wetgeving en compliance
Land van herkomst: GB

Harwin Datemate L-Tek Series Female Crimp Contacts

Datemate L-Tek series female crimp contacts for use in Datemate L-Tek series female crimp housings. These female crimp contacts are gold plated and are rear insertable into the connector. Stock number 511-654 is a large bore contact and accepts a wire size of 22 AWG. Stock number 511-658 is a small bore contact with a small bore indent groove that accepts a wire size range of 24 to 28 AWG.
For crimp tool see stock number 314-7604
For contact insertion and removal tool see stock number 511-759

2.0mm Datamate Series

The Datamate range is ideal for applications where safety is key, the application is subject to high loads of vibration, shock and acceleration or operates in harsh environments. These Datamate connectors are highly durable and can withstand high numbers of mating cycles without any degradation in performance. This performance is made possible by Harwin’s use of High Reliability four finger Beryllium Copper contacts in the Datamate range. These contacts feature a 4 finger clip to ensure integrity of connection under the most severe conditions.

Polarised mouldings
High reliability connector system
The L-Tek Datamate connectors are available with or without Latches.
Mates with known industry equivalents
Suited for COTS applications
Complies with BS9525-F0033/MIL C 55302/CEC 75101-008

Kenmerk Waarde
Gender Female
For Use With Datamate L-Tek, J-Tek and Mix-Tek Connector Housings
Series Datamate
Termination Method Crimp
Minimum Wire Size AWG 28AWG
Contact Plating Gold
Contact Material Beryllium Copper
Maximum Wire Size AWG 24AWG
Minimum Operating Temperature -55°C
Maximum Operating Temperature +125°C
15000 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Bag of 1000)
(excl. BTW)
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
1000 +
€ 0,294
€ 294,00
Related Products
This specification covers the 10.00 mm / (.394 ...
This specification covers the 10.00 mm / (.394 in.) centerline tin and gold, silver plated connector series, single and dual row versions in wire to wire and wire to printed circuit board applications. This product performance is optimized for stranded ...
Leveraging full keying and Colour-pairing features, foolproof CP-3.3 ...
Leveraging full keying and Colour-pairing features, foolproof CP-3.3 wire-to-wire connectors enhance user-safety while preventing mismating in consumer electronics, white goods, industrial and medical applications.
A range of 1.57mm Diameter Standard .062" Pin ...
A range of 1.57mm Diameter Standard .062" Pin and Socket Crimp Terminal contacts available as gold-plated or tinned versions for use with receptacles housings stock number 236-2928 typically and for plug housings 236-2984 typically. • Shell Material: Nylon UL 94-V2• ...
The AMPMODU interconnect system is the signal standard ...
The AMPMODU interconnect system is the signal standard for automation and control applications and is both reliable and economical. The AMPMODU HE14 interconnect system has a 2.54mm centreline and consists of IDC receptacle assemblies for terminating discrete wires or ribbon ...