167024-2 TE Connectivity AMPMODU Mod IV Female Crimp Terminal Contact 28AWG

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Receptacle Crimp Contacts (Mod IV)

A range of Mod IV Receptacle Crimps for 30-28 or 26-22 awg wires:
233-1889 :30-28 AWG, Gold plated, standard pressure, loose.
233-1895 :26-22 AWG, Gold plated, standard pressure, loose.
495-8931 :30-28 AWG, Gold plated, intermediate pressure, loose.
495-8947 :30-28 AWG, Tin plated, intermediate pressure, loose.
For use with shells which mate with shrouded headers, see stock number 509-2537 typical.
For a suitable crimp tool for loose contacts see Stock no. 233-0044 .

Note

Intermediate Pressure, Loose

2.54 TE Connectivity AMPMODU™ IV Range–Style 3 (with SMD compatible shrouded headers)

A wire to board connector system offering the benefit of SMT process compatibility on the PCB mount shrouded headers

Specificaties
Kenmerk Waarde
Gender Female
For Use With AMPMODU MOD IV Connector Housing
Series AMPMODU MOD IV
Minimum Wire Size mm² 0.03mm²
Maximum Wire Size mm² 0.09mm²
Termination Method Crimp
Minimum Wire Size AWG 32AWG
Contact Plating Gold
Maximum Wire Size AWG 28AWG
Contact Material Phosphor Bronze
Maximum Contact Resistance 15mΩ
Minimum Operating Temperature -65°C
Maximum Operating Temperature +105°C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02-11-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 100)
0,299
(excl. BTW)
0,362
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
100 - 900
€ 0,299
€ 29,90
1000 - 2900
€ 0,29
€ 29,00
3000 - 7400
€ 0,281
€ 28,10
7500 - 14900
€ 0,263
€ 26,30
15000 +
€ 0,239
€ 23,90
*prijsindicatie
Verpakkingsopties
Related Products
Datemate L-Tek series female crimp contacts for use ...
Description:
Datemate L-Tek series female crimp contacts for use in Datemate L-Tek series female crimp housings. These female crimp contacts are gold plated and are rear insertable into the connector. Stock number 511-654 is a large bore contact and accepts a ...
Crimp socket contacts for use in the DF57 ...
Description:
Crimp socket contacts for use in the DF57 Series crimp socket housings. These crimp contacts are tin plated and have a two-point contact design for high electrical reliability.
AMPMODU self retaining locking clip crimp contacts for ...
Description:
AMPMODU self retaining locking clip crimp contacts for a permanent connection with quick connect and disconnect. These locking clip wire crimp contacts have insulation support, stainless steel springs and 3 plating options.
Tin plated phosphor bronze, accepts 28 to 24awg ...
Description:
Tin plated phosphor bronze, accepts 28 to 24awg (diameter over insulation 1.2mm)Recommended wire strip length 3.25mm.