ERNI TMC Series, 9 Way Through Hole PCB D-sub Connector Plug, 2.84mm Pitch, with 4-40 Screwlock, M3 Insert

  • RS-stocknr. 259-2725
  • Fabrikantnummer 023156
  • Fabrikant Provertha
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Dip-soldered connection, straight, threaded bolt and sleeve

Sub-D connector Erni

Laminated ground contact on the male housings for optimal screening
Solid contacts on the male connectors with tinned manual soldering termination

Series TMC connectors are available in various housing sizes and with different numbers of pin.

Specificaties
Kenmerk Waarde
Number of Contacts 9
Gender Male
Body Orientation Straight
Mounting Type Through Hole
Pitch 2.84mm
Mounting Hardware M3 Insert, 4-40 Screwlock
Current Rating 7.5A
Housing Material PBT
Voltage Rating 1.25 kV ac
Length 30.8mm
Width 10.8mm
Depth 12.5mm
Dimensions 30.8 x 10.8 x 12.5mm
Series Number 023
Maximum Operating Temperature +125°C
Contact Plating Gold
Series TMC
Minimum Operating Temperature -65°C
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07-08-2020, met een levertijd van 1 werkdag.
Prijs Each
4,38
(excl. BTW)
5,30
(incl. BTW)
Aantal stuks
Per stuk
1 - 9
€ 4,38
10 - 24
€ 3,96
25 +
€ 3,54
Related Products
Straight connectors with a pitch of 2.84 mm ...
Description:
Straight connectors with a pitch of 2.84 mm between rows.Harpoons and UNC 4-40 threaded inserts.Electrical continuity guaranteed.
From Harting, a range of solder D-Sub miniature ...
Description:
From Harting, a range of solder D-Sub miniature connectors with stamped and angled male contacts. The U.S footprint plugs have copper alloy contacts in a robust metal shell with extra grounding pin. Secured in the panel with a fixing flange ...
From Harting, a range of 9 way solder ...
Description:
From Harting, a range of 9 way solder D-sub miniature connectors with straight stamped female contacts. The DIN 41652 sockets have copper alloy contacts housed in a robust metal shell. Secured in the panel with a fixing flange and 4 ...
Straight D-sub connectors for printed circuits.Mounting system using ...
Description:
Straight D-sub connectors for printed circuits.Mounting system using cylindrical harpoons with threaded spacers, also used as earthing point for cards of 1.6 → 3.2 mm thickness.Better hold on the printed circuit; can be used with cards of varying thicknesses (harpoon ...