VCC 5300H1/5, Green & Red Right Angle PCB LED Indicator 3mm (T-1), Through Hole 12 V

  • RS-stocknr. 137-1304
  • Fabrikantnummer 5300H1/5
  • Fabrikant VCC
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

5300 Series T1-3/4 Right Angle LED

VCC 5300 Series T1-3/4 Right Angle sub-miniature LEDs are vertically mounted to simplify PC board mounting. The series includes versions with a built-in resistor chip allowing direct operation from 5V or 12V supplies.

• Side-by-side stackable
• Opaque black nylon housing
• PCB stand-offs prevent flux entrapment
• RoHS compliant

PCB LED Indicators, VCC

Specificaties
Kenmerk Waarde
LED Colours Green, Red
Number of LEDs 1
Mounting Type Through Hole
Supply Voltage 2.2 V
Number of Pins 2
Dominant Wavelength 650 nm
LED Orientation Right Angle
Dimensions 6.1 x 6.1 x 14.48mm
Length 14.48mm
Width 6.1mm
Height 6.1mm
Standards Met UL 94V-0
Forward Current 10mA
Lens Finish Diffused
Configuration Single
LED Size 3mm (T-1)
Series 5300H
Intensity 6.0mcd
945 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
1,136
(excl. BTW)
1,375
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 1,136
€ 5,68
50 - 120
€ 0,744
€ 3,72
125 - 245
€ 0,686
€ 3,43
250 - 495
€ 0,646
€ 3,23
500 +
€ 0,52
€ 2,60
*prijsindicatie
Related Products
The 113 series, from Marl International, are single-level ...
Description:
The 113 series, from Marl International, are single-level PCB LED indicators. They consist of a 3mm (T-1) through-hole LED within a black plastic housing. The package holds the LED at a right whilst providing a high contrast ratio to the ...
The 550-xx07, from Dialight, are LED circuit board ...
Description:
The 550-xx07, from Dialight, are LED circuit board indicators from their CBI® family. They contain one 5mm through-hole LED in a black plastic housing with a sloped back. Their black housings enable a high contrast and housing standoffs help with ...
Dialight's 551-xx07 series are a family of LED ...
Description:
Dialight's 551-xx07 series are a family of LED CBI® circuit board indicators. The consist of one 3mm (T-1) LED in a black plastic housing with a high centreline of 4.45mm. The black housing offers a high contrast whilst holding the ...
These single level PCB LED indicators, from Kingbright, ...
Description:
These single level PCB LED indicators, from Kingbright, consist of a 5mm (T-1 3/4) through-hole LED within a black plastic housing. The housings hold the LED at a right angle to the board whilst providing a high contrast ratio to ...