MS PCB Enclosure, Tin Plated Steel, 51.1 x 25.7 x 6.5mm

  • RS-stocknr. 826-6823
  • Fabrikantnummer MS511-10
  • Fabrikant Masach Tech
Wetgeving en compliance
Land van herkomst: IL

Masach Drawn RF PCB shielding

The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled.
A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference.
The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields.

Features & Benefits

Suitable for high frequency applications
The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary
2 piece design
Robust construction
Seamless protective cage
Optimal planarity


The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. 826-6740

Kenmerk Waarde
Internal Dimensions 51.1 x 25.7 x 6.5mm
Internal Length 51.1 mm
Internal Width 25.7 mm
Internal Height 6.5 mm
Body Material Tin Plated Steel
Series MS
299 op voorraad - levertijd is 1 werkdag(en).
Prijs 1 Pair
(excl. BTW)
(incl. BTW)
1 +
€ 2,15
Related Products
A cost effective range of single piece PCB ...
A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin Finish, 1μm thicknessProvided with PCB Mounting PinsExcellent characteristics for soldering and fusing.
Wurth WE-SHC series shielding cabinets offer a flexable ...
Wurth WE-SHC series shielding cabinets offer a flexable and cost effective solution to a variety of requirements. Comprised of high quality tin, with a shielding effectiveness up to 55dB. The WE-SHC cabinet consists of two parts - a solderable grid ...
This printed circuit board (PCB) enclosure from Phoenix ...
This printed circuit board (PCB) enclosure from Phoenix contact is an ideal way to protect your hardware from general environmental contaminants and accidental damage. PCB’s are easily damaged, so by placing them inside an electronic enclosure box you are ensuring ...
Complete housing for PCBs, can be positioned flexibly, ...
Complete housing for PCBs, can be positioned flexibly, includes housing half shells, side panels closed, adhesive domes for PCB attachment, screws for housing and PCB attachment, light gray housing with turquoise blue corner inlays. High degree of application flexibility, thanks ...