PCB Enclosure, Tin Plated Steel, 2 Pin, 13 x 13 x 5mm

  • RS-stocknr. 917-1952
  • Fabrikantnummer MS130-10
  • Fabrikant Masach Tech
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IL
Productomschrijving

Masach Drawn RF PCB shielding

The MS series of EMI/RFI shielding enclosures from Masach Technologies are constructed as a drawn frame with a snap-on cover. This two part fabrication gives you the option to inspect and repair shielded components without having to remove the entire shield. Two part construction could potentially save tooling costs, and removes the risk of potentially damaging the board. These EMI shields are hermetically sealed and suited to small, medium and large-scale runs. MS series EMI shields are different to standard bent frames and covers that use a manual process to fabricate, as they are tooled.
A range of sizes offers you maximum flexibility with surface mount configurations in the board design phase where there is the potential for interference.
The seamless protective cage design enables high shielding effectiveness, while the solid, reliable construction enables resistance to warping during handling and transit. Reflow soldering allows for a higher yield and planarity for these EMI shields.

Features & Benefits

Suitable for high frequency applications
The use of standard products ensures cost saving, as no original shield designs or prototypes are necessary
2 piece design
Robust construction
Seamless protective cage
Optimal planarity

Note

The Engineering-Kit21 containing a wide range (21 sizes) of Hermetically Sealed Drawn EMI/RFI Shield Standards is also available, see RS Stock No. 826-6740

Specificaties
Kenmerk Waarde
Internal Dimensions 13 x 13 x 5mm
Internal Length 13 mm
Internal Width 13 mm
Internal Height 5 mm
Body Material Tin Plated Steel
Number of Pins 2
Pin Pitch 12.7mm
Standards Met EN 10202:2001
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 01-10-2019, met een levertijd van 2 à 3 werkdagen.
Prijs 1 Pair
4,86
(excl. BTW)
5,88
(incl. BTW)
Pair(s)
1 - 9
€ 4,86
10 - 99
€ 4,72
100 +
€ 4,56
Related Products
A cost effective range of single piece PCB ...
Description:
A cost effective range of single piece PCB mounting Cans, providing good attenuation for applications where board level RFI/EMI screening is required. Bright Acid Tin Finish, 1μm thicknessProvided with PCB Mounting PinsExcellent characteristics for soldering and fusing.
Wurth WE-SHC series shielding cabinets offer a flexable ...
Description:
Wurth WE-SHC series shielding cabinets offer a flexable and cost effective solution to a variety of requirements. Comprised of high quality tin, with a shielding effectiveness up to 55dB. The WE-SHC cabinet consists of two parts - a solderable grid ...
A range of housings designed for applications that ...
Description:
A range of housings designed for applications that require EMI / RFI shielding, for low and high frequencies.Three versions are available:- standard shielded housing with indent cover- open frame with two indent covers for access to components from above or ...
These individual RFI/EMI screening enclosures for PCBs consist ...
Description:
These individual RFI/EMI screening enclosures for PCBs consist of a 20swg steel frame and a 24swg fingered lid both bright acid tin finished. Suitable for low and high frequency useSurface resistivity 20x10-6Ω/cm2Conductivity 5x104Ω.