BJB 46.111, 1 Way PCB Terminal Strip

  • RS-stocknr. 124-1034
  • Fabrikantnummer 46.111.1001.50
  • Fabrikant BJB
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

BJB Terminal for LED Lighting Array

From BJB, this push through terminal block is for use with pushwire terminals and solid conductors in LED arrays. The SMD terminal block is for wiring below the PCB, and requires no tooling as wires can be released by twisting and pulling simultaneously.

Features and Benefits

• Rated Impulse Voltage: 2.5 kV
• Solder fixing
• PPA Housing

BJB LED Downlight System

Specificaties
Kenmerk Waarde
Number of Contacts 1
Number of Rows 1
Mounting Type Surface Mount
Termination Method Solder
Type Terminal Block
Current Rating 9A
Body Orientation Straight
Colour White
Voltage Rating 320 V
Series 46.111
440 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 10)
0,575
(excl. BTW)
0,696
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
10 - 90
€ 0,575
€ 5,75
100 - 490
€ 0,527
€ 5,27
500 +
€ 0,511
€ 5,11
*prijsindicatie
Related Products
SPT 2,5 series 5.0mm pitch through hole vertical ...
Description:
SPT 2,5 series 5.0mm pitch through hole vertical and horizontal mounting PCB terminal blocks with screwless push-in spring cage terminals for solid or stranded wire with ferrules. For non-ferruled wires the terminal is opened using a screwdriver.For screwdriver see stock ...
Print terminals with front spring loaded connectionSolder pins ...
Description:
Print terminals with front spring loaded connectionSolder pins for high stability on the printed circuit boardPlug-and-play technology for rigid or flexible cables with ferruleFor flexible cables without ferrules — open terminal compartment with screwdriverConnect vertically (V) or horizontally (H)3.5 and ...
TERMI-BLOK series screwless PCB mount terminal blocks with ...
Description:
TERMI-BLOK series screwless PCB mount terminal blocks with a 5.0mm centreline, side wire entry and push-in spring terminations that accept a wire size range of 22 to 14 AWG. These 5.0mm screwless PCB terminal blocks are made from green UL ...
Programmed clamping force which adapts to the conductor ...
Description:
Programmed clamping force which adapts to the conductor cross section. Low operating force - a particular advantage on PCB 's2 pins per poleCommoning is easy using push-in jumpersModular constructionWire acceptance 0.08-4mm (28-12awg) PCB hole Diameter 1.5mmRated at 20A/630V.