Phoenix Contact MC 1.5/ 3-ST-3.81 3-pin PCB Terminal Block, 3.81mm Pitch, Rows, Screw Down Termination

Phoenix brings you a series of MC PCB terminal connectors. Featuring a 3.81mm pitch and a well-known name, these connectors are brilliant. They allow a wire from 0.14mm² up to 1.5mm² with a simple screw connection with a tension sleeve and horizontal wire entry. Each connector can have a maximum of two connections with a rated current of 8A.

These terminal blocks allow you to transfer data, signals and power directly to your PCB safely. They make ideal use as permanent solution however can be used in temporary circuitry.

• Maximum reliability due to high quality materials
• 3.81mm pitch
• Screw connection with termination device to help prevent loosening of wire in high vibration
• Copper alloy contact material with tin plated terminal points
• -40°c to +70°c operating temperatures
• Height of only 8mm above the board for a small compact fit

These connectors use a M2 slotted (L) screw. If you need a screwdriver, check out “125-3078”

Other accessories:
• Marker cards – 648-5508
• Cable housing – 742-7409

The 1803581 is a green, 3 position PCB connector from Phoenix Contact that gives secure connection due to the innovative locking methods. Its copper-alloy contacts are highly conductive and offer you a reliable connection. These contacts are tin-plated to provide corrosion resistance, so you can use them for a long time without having to worry about rust.
Thanks to a screw termination method, installation is easy and doesn't need complex tools. A tension sleeve ensures there's no accidental disconnection, making this a useful choice for vibrating systems.
The connector is part of the MC range that allows it to be used worldwide.

• 3.81mm pitch
• M2 screw thread
• Low temperature rise
• Allows the connection of two conductors
• Long service life
• Screw connection with tension sleeve
• Nominal cross section: 1.5 mm²
• Female connector
• Polyamide (PA) body material offers excellent durability
• Tin contact plating
• Dimensions (WxHxL) – 12.22 x 11.1 x 16.1 mm