FLUKE 9040/UK Phase Rotation Tester CAT III 600V, CAT IV 300V LCD CAT III 600 V, CAT IV 300 V 400Hz 700V, Model 9040

  • RS-stocknr. 513-1828
  • Fabrikantnummer FLUKE 9040/UK
  • Fabrikant Fluke
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: CN
Productomschrijving

Fluke 9040

Indication of the three phases via LCD
Indication of the phase rotation direction via LCD
Swift determination of the phase sequence in three-phase networks
Voltage and frequency range suitable for industrial systems
LC-display with good visibility in bright areas (i.e. outdoor)
Non-Fused test probes (500mA 1000V fast acting)

Supplied with

3 Non-Fused test probes, 3 crocodile clips, instruction manual.

Fluke Phase Rotation Indicator

The Fluke phase rotation indicator has a voltage range of 40V to 700V and frequency range of 15Hz to 400Hz. It shows a clear indication of three-phase systems and the phase rotation direction to determine correct connections. This allows rapid determination of phase sequence and frequency range, suitable for commercial and industrial applications. It includes test probes with a variable clamping range for safe contact, also in sockets.
Supplied with
• 3 fused test probes, 1000 V CAT III
• 3 alligator clips, 1000 V CAT III/600 V CAT IV
• Users Manual

Features and Benefits

• 3-phase indication
• Continuous operating timer
• Indication of phase rotation
• Clear LCD display
• No battery required
• Operating temperature ranges between 0°C and 40°C

Applications

• Feed motors
• Drives
• Electrical systems

Certifications

• IP40 rated
• EN 61010
• EN 61557-7
• CAT III 600V safety rated

Caution

The above unit should be checked for correct operation using a known voltage before and after use.

Specificaties
Kenmerk Waarde
Connection Type Test Probe
Overvoltage Category CAT III 600V, CAT IV 300V
Display Type LCD
Safety Category CAT III 600 V, CAT IV 300 V
Current Consumption 1mA
Dimensions 61 x 27 x 124mm
Weight 200g
Height 124mm
Length 61mm
Maximum Frequency 400Hz
Safety Category Voltage 300 V, 600 V
Minimum Voltage 40V
Model Number p 9040
Width 27mm
Safety Category Level CAT III, CAT IV
Maximum Operating Temperature +40°C
Minimum Frequency 15 Hz
Minimum Operating Temperature 0°C
Maximum Voltage 700V
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
49 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
217,00
(excl. BTW)
262,57
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 217,00
Related Products
Phase Rotation Teste - If you install or ...
Description:
Phase Rotation Teste - If you install or connect 3-phase motors and systems, you recognize the importance of verifying the correct motor rotation and wiring phase sequence. Improper connections can cause motors to rotate in reverse direction, potentially damaging the ...
Phase sequence indicator with electronic rotary disk, frequency ...
Description:
Phase sequence indicator with electronic rotary disk, frequency display and nominal voltage displayRotary field direction display by 6 optically rotating LEDs with colour switchingNominal supply voltage displayed by 3 LEDsNominal supply frequency displayed by 6 LEDsError indication: imbalance and missing ...
The Martindale PSI4000 is a unique phase rotation ...
Description:
The Martindale PSI4000 is a unique phase rotation indicator that carries out the measurement via inductive crocodile clips. This method increases the safety of the user, whilst the bright LEDs give a clear indication of either clockwise or anti-clockwise phase ...
The PC15250 Phase Rotation Tester is a simple ...
Description:
The PC15250 Phase Rotation Tester is a simple and quick 3 phase continuity and rotation indicator. The phase sequence indicator gives a fast and effective identification of worn or unmarked cables and ensures 3-phase outlets and machines are wired correctlyRetractable ...