ON Semiconductor, ArrayC-30035-16P-PCB 1-Element Photodetector, Through Hole

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

4-Side scalable arrays
Variety of formats ranging from 2´2 to 12´12
Minimal deadspace at the edges allowing tiling on all sides to allow the creation to still larger detection areas
Each array has either a multi-way connector or BGA on the reverse for access to all signals
The pixel signals can either be read out individually for imaging applications, or summed by the user to create a large area, single-channel sensor
The pixel-level performance is exactly as per that of the individual C-Series sensors
Optional evaluation boards for are available for easy access to signals
Applications
Medical Imaging
Hazard & Threat
3D Ranging & Sensing
Biophotonics & Sciences
High Energy Physics

Specificaties
Kenmerk Waarde
Element Type Photomultiplier
Number of Elements 1
Number of Pins 16
Mounting Type Through Hole
Dimensions 16.6 x 16.6 x 6.5mm
Height 6.5mm
Length 16.6mm
Width 16.6mm
Series C
1 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
443,09
(excl. BTW)
536,14
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 443,09
5 +
€ 432,01
Related Products
The DLP4500 digital micromirror device (DMD) is a ...
Description:
The DLP4500 digital micromirror device (DMD) is a digitally controlled MOEMS (micro-opto-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP4500 can be used to modulate the amplitude and/or direction of incoming light. The DLP4500 ...
The TSL1401CL linear array from Austriamicrosystems consists of ...
Description:
The TSL1401CL linear array from Austriamicrosystems consists of integrating photosensing pixels. These pixels measure incident light over a user-defined exposure time and generate a voltage or digital output which represents the light exposure at each pixel. The analogue output may ...
ON Semiconductor's J-Series silicon photomultiplier (SiPM) sensors have ...
Description:
ON Semiconductor's J-Series silicon photomultiplier (SiPM) sensors have been used to create high fill-factor, scalable arrays. The TSV-packaged sensors are mounted onto PCB boards with minimal dead space. The ArrayJ products are available in a variety of formats and formed ...