Osram Opto SFH 213 IR + Visible Light Si Photodiode, 10 °, Through Hole 5mm package

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

PIN Photodiodes - 5mm (T-1 3/4) Package

This family of photodiodes, from OSRAM Opto Semiconductors, come in standard 5mm (T-1 3/4) through-hole packages. They are designed to detect either full spectrum or visible light and come in clear packages. Photodiodes with the daylight filter option are available for blocking out ambient visible light. Suitable applications for the 5mm PIN photodiodes include; high speed photointerrupters, industrial electronics and for control/drive circuits.

5mm (T-1 3/4) packages
Clear plastic packages
Through-hole mounted
Radiant sensitive area: 1 x 1 mm²
Variety of acceptance angles
Wavelength range: 400 to 1100 nm
Short switching time

Photodiodes, OSRAM Opto Semiconductors

Specificaties
Kenmerk Waarde
Spectrums Detected Infrared, Visible Light
Wavelength of Peak Sensitivity 850nm
Package Type T-1 3/4
Mounting Type Through Hole
Number of Pins 2
Diode Material Si
Minimum Wavelength Detected 400nm
Maximum Wavelength Detected 1100nm
Length 5.9mm
Width 5mm
Height 9mm
Polarity Forward
Angle of Half Sensitivity 10 °
Peak Photo Sensitivity 0.65A/W
485 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1930 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each (In a Pack of 5)
0,942
(excl. BTW)
1,14
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 5
€ 0,942
€ 4,71
10 - 45
€ 0,772
€ 3,86
50 - 245
€ 0,552
€ 2,76
250 - 495
€ 0,452
€ 2,26
500 +
€ 0,344
€ 1,72
*prijsindicatie
Verpakkingsopties
Related Products
The APDS-9006 series, from Avago Technologies, are a ...
Description:
The APDS-9006 series, from Avago Technologies, are a family of miniature SMD ambient light photo sensors. They come in reverse mount miniature chip LED packages with temperature and voltage compensation features. Suitable applications for the APDS-9006 include; electronic signs/signals, automatic ...
The DLP4500 digital micromirror device (DMD) is a ...
Description:
The DLP4500 digital micromirror device (DMD) is a digitally controlled MOEMS (micro-opto-electromechanical system) spatial light modulator (SLM). When coupled to an appropriate optical system, the DLP4500 can be used to modulate the amplitude and/or direction of incoming light. The DLP4500 ...
The TSL1401CL linear array from Austriamicrosystems consists of ...
Description:
The TSL1401CL linear array from Austriamicrosystems consists of integrating photosensing pixels. These pixels measure incident light over a user-defined exposure time and generate a voltage or digital output which represents the light exposure at each pixel. The analogue output may ...
TEMD5510FX01 ambient light sensor is a PIN photodiode ...
Description:
TEMD5510FX01 ambient light sensor is a PIN photodiode with high photo sensitivity in a miniature surface mount device (SMD). The detector chip has 7.5 mm2 sensitive area. It is sensitive to visible light much like the human eye and has ...