Sick Cable, For Use With V200 Series, V300 Series

  • RS-stocknr. 701-9234
  • Fabrikantnummer DOL-127SG05ME25KM0
  • Fabrikant Sick
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

V20 and V30 Quick Install Safety Camera

The V300 WS is a completely new sensor based on innovative camera technology, developed for monitoring hazardous points on typically rectangular action openings – with just one component, mounted in a corner of the safety area, saving space and in a protected location. The “one sensor fits all sizes” concept puts an end to the numerous types – one variant covers the most diverse safety areas up to a maximum width of 1 m and with a maximum side ratio of 2:1. The optics used have a wide aperture angle, the invisible LED light beam in combination with the reflector ensures robust monitoring that is resistant to environmental factors. The V300 WS is Type 3 (SIL2) and is thus a real substitute for Type 4 solutions while the V200 WS is a convincing economical solution if only Type 2 is required.

Simple to install, no specialist knowledge or configuration software needed
Intuitive one button set up
No blind spots
One system fits all protective field sizes
Components and the evaluation unit are integrated in a single compact housing
Sensor can handle tolerances of several centimetres along the optical axis
Flexible protective field geometries
Automatic alignment
Restart/reset, EDM integrated
2 x 250 mA switching outputs
1 x EDM input, 1 x restart interlock input, 1 x teach/sync input
Response time 20 ms
IP54 enclosure rating

Note

A resolution set has to be ordered separately

Safety Camera

Specificaties
Kenmerk Waarde
Accessory Type Cable
For Use With V200 Series, V300 Series
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
11 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
23,09
(excl. BTW)
27,94
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 23,09
5 +
€ 22,16
Related Products
Heavy duty fibre optic sensor module and a ...
Description:
Heavy duty fibre optic sensor module and a choice of through-beam or direct-detect glass fibre optic cables with stainless steel jackets. PNP open collector outputOutput short circuit and over current protectedNo tools required to fit cablesTerminal chamber connection to module. ...
Two PPI programming cables for programme uploading, downloading ...
Description:
Two PPI programming cables for programme uploading, downloading and monitoring, at baud rates of 9.6k, 19.2k or 187.5k. Token handling is performed in the cable giving faster and more reliable access to multi-mode networks. RS-232 (serial) version connects directly to ...
Pepperl + Fuchs SC-System signal conditioners are especially ...
Description:
Pepperl + Fuchs SC-System signal conditioners are especially designed for general purpose applications and ensure reliable process communication. High-quality isolation, an extended temperature range, and an extremely compact housing design characterise the signal conditioner range. The SC-System offers powerful ...
The FQ2 vision sensor family is set to ...
Description:
The FQ2 vision sensor family is set to redefine the vision sensor market, providing advanced inspection, code reading and verification only previously available in higher end vision systems. With over 100 camera options, the FQ2 provides users with the ultimate ...