ifm electronic Through Beam (Fork) Photoelectric Sensor 0.3 (Smallest) mm Detection Range NPN, PNP IP67 Fork Style

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

ifm OPU Optical Fork Sensors

ifm OPU series optical fork sensors with a robust metal housing offer quick setup with no need to align a transmitter and receiver. These optical sensors are used in particular for part monitoring in feeder and handling systems. Further application examples are belt edge or double feed monitoring with the exact sensitivity setting via potentiometer being helpful. The fine light beam with its constant small diameter is also ideal for monitoring shaft imbalance.

Features and Benefits

Metal housing reduces distortion Quick setup: no need to align transmitter and receiver
Easy sensitivity setting via potentiometer
Light-on/dark-on mode via rotary switch
Across the whole fork width: fine and precise light beam

Specificaties
Kenmerk Waarde
Sensor Style Fork
Detection Type Through Beam (Fork)
Detection Range 0.3 (Smallest) mm
Output Type NPN/PNP
Electrical Connection 3-Pin M8 Connector
Maximum DC Voltage 35V
Terminal Type Quick Disconnect
Light Source LED
IP Rating IP67
Maximum Current 40 mA
Housing Material Die Cast Zinc
Minimum Operating Temperature -25°C
Standards Met CE, CULus
Maximum Operating Temperature +60°C
13 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
146,10
(excl. BTW)
176,78
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 146,10
Related Products
Visible red lightOptimised for the detection of small ...
Description:
Visible red lightOptimised for the detection of small partsSturdy aluminium housingSensitivity adjuster and light/dark switch as standard features of this seriesHigh switching frequencySupply Voltage 10 to 30 VdcM8 Connector, 3-pinProtection degree IP67.
Low-cost cylindrical M18 sensor with extra short housingFive ...
Description:
Low-cost cylindrical M18 sensor with extra short housingFive different housing stylesVariety of plastic and metal housing styles, with straight or right angle opticsBright and highly visible PinPoint-LEDPotentiometer for adjustment of switching threshold (depending on type)Special flush type, one-piece metal ...
Typical installations are, assembly robots, cream solder print ...
Description:
Typical installations are, assembly robots, cream solder print machines and PCB assembly machines. Black plastic housingLED indicationIP50 Operating temperature range: -10° to +55° CSuitable connectors are stock numbers 219-2448 and 219-2454.
Optosensors for the food industry and factory automationProtection ...
Description:
Optosensors for the food industry and factory automationProtection rating: IP68High chemical resistance thanks to use of special materials2 different connection techniquesEasy assembly through snap-fitting to V4A mounting baseCompatible 4-pole M8 cable, e.g.: RS stock no.: 282-928.