U bent doorgestuurd naar RS Nederland
Distrelec is gefuseerd met de RS Group om u een breder productaanbod, plaatselijke ondersteuning en betere services te kunnen bieden.
SICK Retroreflective Photoelectric Sensor, Block Sensor
- RS-stocknr.:
- 266-9324
- Artikelnummer Distrelec:
- 137-62-919
- Fabrikantnummer:
- WL34-B430
- Fabrikant:
- SICK
Subtotaal (1 eenheid)*
€ 163,62
(excl. BTW)
€ 197,98
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 28 september 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 163,62 |
*prijsindicatie
- RS-stocknr.:
- 266-9324
- Artikelnummer Distrelec:
- 137-62-919
- Fabrikantnummer:
- WL34-B430
- Fabrikant:
- SICK
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SICK | |
| Sensor Style | Block | |
| Product Type | Photoelectric Sensor | |
| Detection Type | Retroreflective | |
| Output Type | NPN/PNP | |
| Terminal Type | 4-Pin Connector | |
| Interface Type | 4-Pin Connector | |
| Maximum DC Voltage | 30V dc | |
| Light Source | LED | |
| Minimum Operating Temperature | -40°C | |
| IP Rating | IP67 | |
| Maximum Operating Temperature | 60°C | |
| Maximum Current | 100mA | |
| Response Time | 500μs | |
| Standards/Approvals | CE, cULus | |
| Hazardous Area Certification | No | |
| Mount Type | Threaded | |
| Series | W34 | |
| Housing Material | ABS, Plastic | |
| Detection Range | 0.03 - 15 M | |
| Alles selecteren | ||
|---|---|---|
Merk SICK | ||
Sensor Style Block | ||
Product Type Photoelectric Sensor | ||
Detection Type Retroreflective | ||
Output Type NPN/PNP | ||
Terminal Type 4-Pin Connector | ||
Interface Type 4-Pin Connector | ||
Maximum DC Voltage 30V dc | ||
Light Source LED | ||
Minimum Operating Temperature -40°C | ||
IP Rating IP67 | ||
Maximum Operating Temperature 60°C | ||
Maximum Current 100mA | ||
Response Time 500μs | ||
Standards/Approvals CE, cULus | ||
Hazardous Area Certification No | ||
Mount Type Threaded | ||
Series W34 | ||
Housing Material ABS, Plastic | ||
Detection Range 0.03 - 15 M | ||
- Land van herkomst:
- DE
Overview
A distinguishing feature of the W34 product family is the rugged ABS plastic housing where all control elements are in a protected location under the “optics cover”. As a result, these sensors can also be used for outdoor applications. Especially for harsh and extreme ambient conditions, we recommend using the zinc die cast housing (W24-2 product family). The sensors are equipped with minimum set of functions to reduce the variety of devices and consequently the storage requirements. Furthermore, this device design comes in DC and DC/AC variants. The W34 product family includes photoelectric proximity sensors with background suppression, photoelectric retro-reflective sensors, and a through-beam system.
The photoelectric proximity sensors are characterized by their high precision at long distances as well as their high ambient light immunity.
At a glance
Rugged plastic or zinc die cast housing (W24-2)
Control elements are protected under an optics cover
High ambient light immunity and no interference when mounting the photoelectric proximity sensors opposite one another
NPN/PNP mode toggle
Light/dark mode toggle
Variants for 10 … 30 V DC or 12 … 240 V DC / 24 ... 240 V AC voltage supply
Optional: test input, time stages and contamination warning
M12 male connector or M16 screw connection, both rotatable by 90°
Your Benefit
Very good chemical resistance increases the service life
Control elements under the “optics cover” provide flexibility as well as best possible protection in the application and reduce the
variety of devices and therefore storage requirements
Operational safety in ambient light and when devices are mounted opposite one another
Highest availability thanks to the very high operating reserve of the photoelectric sensors and through-beam photoelectric sensors
Assembly compatibility - DC devices and DC/AC devices available in the same design