03-5109, Double Sided Photoresist Board FR4 35μm Copper Thick, 100 x 220 x 1.6mm

  • RS-stocknr. 164-0555
  • Fabrikantnummer 03-5109
  • Fabrikant Fortex
Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing boards to be easily inspected at the developing stage. Panels are protected by a specially designed light-proof blue film which allows panels to be guillotined without the risk of fracturing the Photoresist.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 100 x 220 x 1.6mm
Copper Thickness 35 μm, 70 μm
FR Material Grade FR4
Length 100mm
Thickness 1.6mm
Width 220mm
35 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
6,37
(excl. BTW)
7,71
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 6,37
5 - 9
€ 6,25
10 +
€ 6,12
Related Products
Double sided backplanes 3U high with pth for ...
Description:
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be ...
This series of nut plates is designed to ...
Description:
This series of nut plates is designed to give technicians the ability to fine-tune the backplane to the requirements of their system. Each hole is a through-hole and the connector can be wired to series B as OV to prevent ...
These prototyping boards from Roth Elektronik are available ...
Description:
These prototyping boards from Roth Elektronik are available in a range of sizes with the following features:. Double-sidedHot air levelling – HAL-lead-free With holes – spacing: 2.54 x 2.54 mm35 μm CUSize: 100 x 160 mmRS Stock No. 808-8382 Plated ...
Part of the Polymer Optics Modular LED Optics® ...
Description:
Part of the Polymer Optics Modular LED Optics® range, these Metal Core Printed Circuit Boards (MCPCBs) mate with hexagonal cluster optics and can be used for customer prototyping and luminaire production using emitter LED devices.