03-5153-1, Double Sided Photoresist Board FR4 35μm Copper Thick, 233.4 x 160 x 1.6mm

  • RS-stocknr. 164-0557
  • Fabrikantnummer 03-5153-1
  • Fabrikant Fortex
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Microtrak FR4 epoxy glass laminates are dip coated with a high resolution positive working Photoresist. The Photoresist contains a dye which gives a good contrast against the copper, allowing boards to be easily inspected at the developing stage. Panels are protected by a specially designed light-proof blue film which allows panels to be guillotined without the risk of fracturing the Photoresist.

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 233.4 x 160 x 1.6mm
Copper Thickness 35µm
FR Material Grade FR4
Length 233.4mm
Thickness 1.6mm
Width 160mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
9,36
(excl. BTW)
11,33
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 9,36
5 - 9
€ 9,09
10 +
€ 8,97
Related Products
Prototyping boards manufactured from epoxy glass material to ...
Description:
Prototyping boards manufactured from epoxy glass material to BS 4584 part 3 or 16. Card thickness is 1.6 mm. Copper is 305 g/m² (1 oz/ft²). Edge connector fingers are gold plated to a thickness of 1.5 microns. 1.0 mm (0.040 ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Recommended for wire-wrapping applicationsEpoxy glass - CEM 301.6mm thick, copper-cladSingle sidedHole pitch 2.54mm (0.1in)Hole dia 1.0mm.
The double-sided microboards are designed for microprocessor applications ...
Description:
The double-sided microboards are designed for microprocessor applications where compatibility, flexibility, high density and screening are of prime importance. VCC rails and a VCC bus are provided but not connected, so that individual rails may be committed as required. 64//96-way ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Plated through holes (double sided 321//322 types)Nominal thickness 1.5mmCopper thickness 35μmHole Pitch 2.54mm (0.1 in)Hole dia 1.0mm.