ABC20, Double Sided Photoresist Board FR4 35μm Copper Thick, 300 x 200 x 0.4mm

  • RS-stocknr. 292-6954
  • Fabrikantnummer ABC20
  • Fabrikant CIF
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: FR
Productomschrijving

FR4 Pre-Sensitised Boards

Complies with the military standard: 113949 F

FR4 epoxy boards.
Fire resistance: UL 94-V0
Board thickness 0.4mm
Copper thickness 35μm

Note

Developer concentration: use sachet 160-9490 or 6-10g/l of Sodium or Potassium Hydroxide. Conduct trials if in doubt.

Approvals

UL, CSA (K130 and above)

Specificaties
Kenmerk Waarde
Base Material Epoxy Glass Fabric Laminate
Number of Sides 2
Dimensions 300 x 200 x 0.4mm
Copper Thickness 35µm
FR Material Grade FR4
Length 300mm
Thickness 0.4mm
Width 200mm
14 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
17,84
(excl. BTW)
21,59
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 17,84
5 - 9
€ 16,95
10 - 39
€ 16,11
40 +
€ 15,29
Related Products
Double sided backplanes 3U high with pth for ...
Description:
Double sided backplanes 3U high with pth for high reliability which will accept DIN41612 connectors. Suitable for use with subracks to IEC297-3. 96//96-way suitable for high speed logic systems where screening is required between each signal line. Can also be ...
A 64-way single-sided Eurocard backplane suitable for use ...
Description:
A 64-way single-sided Eurocard backplane suitable for use with 64//96 (a/c) DIN 41612 indirect edge connectors, in conjunction with Eurocard sub-racks to DIN 41494, e.g. the RS eurocard sub-rack system (except 4HP and 10HP card fronts).,Dimensions: Height 3U. Width 84HP. ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. Laboratory cards made from FR2 laminated paper (HP) coated with solder mask or made from FR4 epoxy (LF), lead-free, tin-platedMaterial thickness 1.5 mm35 μm copper laminateHole pattern 2.54 ´ 2.54 mmSoldering ...
Matrix boards with 1mm holes on a 2.54mm ...
Description:
Matrix boards with 1mm holes on a 2.54mm pitch. 1.5 mm FR4 epoxy laboratory cardThrough hole platedHot dip tin-plated (HAL lead-free)32 / 64 / 96-pin plug connector, DIN 41612 design C.