Microchip Technology KSZ9031RNXIC, 1000BASE-T, 100BASE-TX, 10BASE-T, IEEE 802.3 Ethernet Transceiver, 3.3 V, 48-Pin QFN

  • RS-stocknr. 177-3549
  • Fabrikantnummer KSZ9031RNXIC
  • Fabrikant Microchip
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: US
Productomschrijving

The KSZ9031 reduces board cost and simplifies board layout by using on-chip termination resistors for the four differential pairs and by integrating an LDO controller to drive a low-cost MOSFET to supply the 1.2V core.

Single-chip 10/100/1000Mbps Ethernet transceiver
KSZ9031Mxx feature GMII/MII standard interface with 3.3V/2.5V/1.8V tolerant I/Os
KSZ9031Rxx feature RGMII timing supports on-chip delay according to RGMII Version 2.0, with programming options for external delay and making adjustments and corrections to TX and RX timing paths
GMII/MII/RGMII with 3.3V/2.5V/1.8V tolerant I/Os
Auto-negotiation to automatically select the highest linkup speed (10/100/1000Mbps) and duplex (half/full)
On-chip termination resistors for the differential pairs
On-chip LDO controller to support single 3.3V supply operation – requires only one external FET to generate 1.2V for the core
Jumbo frame support up to 16KB
125MHz Reference Clock Output
Energy-detect power-down mode

Specificaties
Kenmerk Waarde
Standard Supported IEEE 802.3, 10BASE-T, 100BASE-TX, 1000BASE-T
Number of Channels per Chip 1
Typical Data Rate 1000Mbit/s
Power Supply Type Single
Typical Operating Supply Voltage 3.3 V
Mounting Type Surface Mount
Package Type QFN
Pin Count 48
Dimensions 7 x 7 x 0.8mm
Height 0.8mm
Length 7mm
Maximum Operating Temperature +85 °C
Automotive Standard AEC-Q100
Minimum Operating Temperature -40 °C
Width 7mm
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 14-07-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Tray of 260)
2,768
(excl. BTW)
3,349
(incl. BTW)
Aantal stuks
Per stuk
Per tray*
260 +
€ 2,768
€ 719,68
*prijsindicatie