Microchip , 1-Channel Ethernet Transceiver 48-Pin LQFP, KSZ8081MLXIA
- RS-stocknr.:
- 177-3902
- Fabrikantnummer:
- KSZ8081MLXIA
- Fabrikant:
- Microchip
1250 op voorraad - levertijd is 1 werkdag(en).
Toegevoegd
Prijs Elk (in een pakket van 5)
€ 1,856
(excl. BTW)
€ 2,246
(incl. BTW)
| Aantal stuks | Per stuk | Per pak* |
| 5 - 20 | € 1,856 | € 9,28 |
| 25 - 95 | € 1,80 | € 9,00 |
| 100 + | € 1,736 | € 8,68 |
| *prijsindicatie | ||
- RS-stocknr.:
- 177-3902
- Fabrikantnummer:
- KSZ8081MLXIA
- Fabrikant:
- Microchip
Datasheets
Wetgeving en compliance
Productomschrijving
The KSZ8081 is a single-supply 10Base-T/100Base-TX Ethernet physical-layer transceiver for transmission and reception of data over standard CAT-5 unshielded twisted pair (UTP) cable.
Single-chip 10Base-T/100Base-TX Ethernet transceiver
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
MII interface support (KSZ8081MNX)
RMII v1.2 Interface support with a 50MHz reference clock output to MAC, and an option to input a 50MHz reference clock (KSZ8081RNB)
RMII back-to-back mode support for a 100Mbps copper repeater
MDC/MDIO management interface for PHY register configuration
Programmable interrupt output
LED outputs for link and activity status indication
On-chip termination resistors for the differential pairs
Baseline wander correction
HP Auto MDI/MDI-X to reliably detect and correct straight-through and crossover cable connections with disable and enable option
Auto-negotiation to automatically select the highest linkup speed
Specificaties
Kenmerk | Waarde |
|---|---|
| Number of Channels per Chip | 1 |
| Typical Data Rate | 100Mbit/s |
| Power Supply Type | Single |
| Typical Operating Supply Voltage | 3.3 V |
| Mounting Type | Surface Mount |
| Package Type | LQFP |
| Pin Count | 48 |
| Dimensions | 7 x 7 x 1.45mm |
| Maximum Operating Temperature | +85 °C |
| Minimum Operating Temperature | -40 °C |