West Instruments N6500 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 1 Output Relay, 24 → 48 V ac/dc Supply
- RS-stocknr.:
- 229-3428
- Fabrikantnummer:
- N6500Z210002
- Fabrikant:
- West Instruments
Niet meer leverbaar – bekijk hieronder eventuele alternatieven of neem contact op met onze Customer Service
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
- RS-stocknr.:
- 229-3428
- Fabrikantnummer:
- N6500Z210002
- Fabrikant:
- West Instruments
Wetgeving en compliance
N.v.t.
- Land van herkomst:
- GB
Productomschrijving
West Instruments Temperature Controller
The West Instruments N6500 series temperature controller has a supply voltage rating ranging from 24VAC to 48VAC or DC. This controller has a width of 48mm and a height of 48mm(1/16DIN) device. It has thermocouple input and single relay control. It thermocouple based and has a range of units that are suitable for implementation into most systems. The PID function within the controller offers a continuous control feedback loop to calculate error values between the users desired setpoint and the processes measured variable value. This calculation drives proportional change within the system to make corrections back to the desired setpoint.
The N6500Z210002 model controller from West instruments is a single relay output unit that requires a 24-48 VAC/DC power supply. This single-output model allows for simple and easy installation with West Instruments entry-level controller.
The N6500Z210002 model controller from West instruments is a single relay output unit that requires a 24-48 VAC/DC power supply. This single-output model allows for simple and easy installation with West Instruments entry-level controller.
Features and Benefits
Adjustable PV offset
Bold 13mm high 3-digit red LED display
Clear and easy to use 3 button operator interface
Control relay or SSR plus optional alarm relay
Easy tune (PID) or ON/OFF
Fast setup and commission
On-control, set-up, alarm and set point indicators
Bold 13mm high 3-digit red LED display
Clear and easy to use 3 button operator interface
Control relay or SSR plus optional alarm relay
Easy tune (PID) or ON/OFF
Fast setup and commission
On-control, set-up, alarm and set point indicators
Applications
Baking
Curing rubber
Drying/evaporating solvents from painted surfaces
Heat treatment of metals
Curing rubber
Drying/evaporating solvents from painted surfaces
Heat treatment of metals
Certifications
CE certified
IP20 rated
IP66 rated
UL approved
IP20 rated
IP66 rated
UL approved
Specificaties
Kenmerk | Waarde |
---|---|
Output Type | Relay |
Supply Voltage | 24 → 48 V ac/dc |
Size | 48 x 48 (1/16 DIN)mm |
Number of Outputs | 1 |
Minimum Operating Temperature | 0°C |
Maximum Operating Temperature | +55°C |
Temperature Range | 0 → +800 (Thermocouple) °C, 0 → 99.9 (RTD) °C, -50 → +800 (RTD) °C |
Control Type | ON/OFF |
Display Type | LED |
IP Rating | IP20, IP66 |
Additional Functionality | ON/OFF |
Range | P 6500 |
Series | N6500 |
Panel Depth | 120mm |
Display Colour | Red |