West Instruments N6600 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 1 Output Relay

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

West N6600 Temperature Controller

The West N6600 is a 1/16DIN controller that is designed specifically to provide quality process control for the Plastics Extrusion Market.

This control features a special Heater Break Alarm Function which works similar to an amp meter, but alerts the operator to heater failures when they occur and prior to production problems. Quick Transfer is a one shot operation which automatically sets the alarm condition for the heater break and is based on the nominal current value. Quick Transfer allows for the automatic entry of setpoints for the heater break alarm. In addition, the Auto/Manual key can be configured for fast access to display amps or process temperature by a single key stroke.

Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up. Soft Start is included on this control, and is used to dry heaters out prior to production. Soft-start is used in injection molding hot runner and other cartridge heater applications. The N6600 controller incorporates our advanced tuning algorithms, with selectable pre-tune and self-tuning. The pre-tune is used on start-up and is a one-step tuning algorithm designed to get you to setpoint fast with self-tuning being enabled near setpoint and normal operating conditions to control overshoot. The self-tune is a continuous tuning algorithm or sometimes referred to as adaptive tuning. This control can also be manual fine-tuned for specific applications

• Four outputs, one sensor input, one current transformer input, plus RS-485 communications option
• Heater break alarms reduce scrap and improve quality by detecting heater loss prior to production problems
• Two standard tuning algorithms: Pre-tune for fast start-up and Self-tune adaptive tuning
• Quick transfer automatically sets heater break alarm conditions based on the nominal current value
• Soft Start prevents premature heater failure due to high levels of moisture in heaters at start-up

Approvals

UL recognised

West Instruments N Series Temperature Controllers

Specificaties
Kenmerk Waarde
Output Type Relay
Supply Voltage 100 V ac, 240 V ac
Size 48 x 48 (1/16 DIN)mm
Number of Outputs 1
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Control Type ON/OFF
Display Type LED
IP Rating IP20, IP66
Range P 6600
Series N6600
Panel Depth 120mm
9 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
239,73
(excl. BTW)
290,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 239,73
Related Products
Series 2000 is a family of temperature and ...
Description:
Series 2000 is a family of temperature and process controllers with different levels of performance in different sizes. Units share the same styling, wiring layouts and operating principles. Tactile buttons coupled with simple intuitive display formats make them easy to ...
The West N6500 series temperature controllers are a ...
Description:
The West N6500 series temperature controllers are a Thermocouple based range of units offered in a standard 1/16DIN construction suitable for implementation into most systems. The controllers easy tune (PID) functionality means for simplified set up and commissioning as well ...
Combining flexibility in the field, broad technical functionality ...
Description:
Combining flexibility in the field, broad technical functionality as well as a simple and easy to use display, the 6100 series temperature controller from West Instruments is a comprehensive and reliable process control tool. Suitable for heat and cool operation, ...
Freely programmable process controller in four formatsTried-and-tested, clearly ...
Description:
Freely programmable process controller in four formatsTried-and-tested, clearly laid-out operating and configuration diagramBright LCD display for viewing different process parametersMax. two freely programmable analogue inputsUp to 8 binary outputs Four limit comparatorsFreely programmable controller structures ...