West Instruments P6100 PID Temperature Controller, 48 x 48 (1/16 DIN)mm, 1 Output Relay

Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

West 6100 Temperature Controller

Combining flexibility in the field, broad technical functionality as well as a simple and easy to use display, the 6100 series temperature controller from West Instruments is a comprehensive and reliable process control tool.

Suitable for heat and cool operation, the 6100 series features two process alarms, a loop alarm, RS485 comms as well as auto/manual tuning, ramping set point and the ability to configure via a PC. These features teamed with the controller’s easy to use 4 button operation, dual 4 digit LED displays showing 10mm and 8mm high characters and 3 LED indicators, the 6100 series controllers are versatile and suitable for a wide range of systems while remaining simple to install and maintain.

Featuring multiple control types, the temperature controller features full PID with pre-tune, self-tune, manual tuning as well as standard on-off control. Control functions also include heat and cool or heat only. Selectable from the front panel, the 6100 series PID controller has bumbles transfer between automatic and manual tuning, selectable via the controllers front panel.

The thermocouple single input on the controller is suitable for use with type J, K, R, S, T, B, L & N thermocouples with ˃100MΩ impedance.

The P6100-2100-00-0 model from West Instruments is a relay output based controller with a single thermocouple input and single configurable relay output. This easy to use configuration is suitable for different applications for both heating and cooling and with the addition of an IP66 rated facia, the P6100-2100-00-0 is with dust and water proof.

Powered through a 100 - 240 V ac supply, the standard 1/16DIN unit is quick and easy to install into any standard DIN unit and can be used with DIN size adapters allowing this PID controller to be installed into almost any system.

West Instruments Plus Series Temperature Controllers

Specificaties
Kenmerk Waarde
Output Type Relay
Supply Voltage 100 V ac, 240 V ac
Size 48 x 48 (1/16 DIN)mm
Number of Outputs 1
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Control Type ON/OFF
Display Type LED
IP Rating IP20, IP66
Range P 6100
Panel Depth 120mm
Series P6100
14 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
104 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
237,25
(excl. BTW)
287,07
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 237,25
Related Products
E5L series analogue and digital electronic thermostats. A ...
Description:
E5L series analogue and digital electronic thermostats. A high switching capacity of 10 A at 250 VAC enables direct load switchingA sensor is provided to enable immediate applicationSockets with finger protection (PTF14A-E) or without finger protection (PTF14A) can be usedSimple ...
Fixed value or program controller2 parameter blocksAutotuningSetpoint changeover ...
Description:
Fixed value or program controller2 parameter blocksAutotuningSetpoint changeover (4 setpoint values)Ramp functionTimer function4 limit value monitoring functionsService counterIndividual operator levelSeparate application using structured text (ST code, option)Math and logic function (option)Fast wiring through ...
The safety temperature limiter STB 55 is used ...
Description:
The safety temperature limiter STB 55 is used wherever thermal processes need to be monitored, and the plant switched into a safe condition in case of a fault.If the permissible temperature limit is reached or if a fault occurs in ...
The JUMO safetyM TB/TW is a freely programmable ...
Description:
The JUMO safetyM TB/TW is a freely programmable temperature limiting device.The measurement input is freely configurable for RTD temperature probes and thermocouples, as well as for current and voltage signals. Clear, easy-to-read alphanumerical displayInput 2 x Pt100 for differential measurementDigital ...