ABB CM30 Controller, 97 x 97mm, 3 Output Analogue, Relay, 100 → 240 V ac Supply Voltage ON/OFF

  • RS-stocknr. 736-2831
  • Fabrikantnummer CM30/1S0S0E0/STD
  • Fabrikant ABB
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

ControlMaster PID Controller CM30

The ControlMaster CM30 is a highly scalable 1/4 DIN PID process controller for a variety of measurement and control applications. Process information is clearly presented on the CM30’s full-colour TFT screen. The CM30’s crystal-clear screen is intuitive for simple configuration as well as being user customisable for the most efficient operation. The highly scalable unit works with both hardware and software functionality, a CM30 can be user customised easily to meet process control needs in application both simple and advanced.

The powerful problem solving functionality of the CM30 is provided by adaptive control functions for wide range of process applications. Configurable via the easy to navigate front panel menus or via PC configuration software, the CM30 can be quickly commissioned then tuned with the advanced autotune capability.

Features and Benefits

• Full-colour 9cm (3.5”) TFT display
• User-customisable
• English, German, French, Italian and Spanish language options
• Historical trending
• Scalable for application requirements
• Math and logic functionality
• IP 66 and NEMA 4X environmental protection
• Analogue PID
• Motorised valve control
• Basic and standard setpoint switching
• Output tracking
• Custom linearises
• Delay timers

Functionality:

8 Independent process alarms allow for analogue signal monitoring within the CM30 to enable extensive process monitoring functionality. Alarms can also be used to drive physical outputs or to drive soft-wired functions within the controller.

The autotune capability in the CM30 enables automatic calculation of the PID values straight after the initial configuration is complete for rapid commissioning of the unit in any application.

The CM30’s gain scheduling feature is used to control non-linear processes. Up to 3 different sets of PID parameters are automatically selected ensuring optimum control response regardless of process status.

Split output control configuration of the CM30 allows for controlling both heating and cooling of a single process if required.

Math and logic functions within the CM30 provide a range of arithmetic and equation capabilities. Averaging, mix. and max. hold, square root and signal switching functions can be performed in a single math block for simple equations or can be processed across multiple math blocks to construct more complex equations. Similar to the Math functionality, the 8 comprehensive logic blocks offer powerful interlock functionality. Logic equations inputs and outputs can be soft-wired to any digital signal in the controller to maximise flexibility.

I/O Build:

• 2 Analogue inputs
• 1 Analogue output
• 2 Relays

Base Templates:

• Single loop with local setpoint
• Single loop with remote setpoint

Standard Templates:

• Auto/Manual station (low or digital signal selection)
• Analogue backup station (low or digital signal selection)
• Single indicator/manual loader station
• Dual indicator/manual loader station

Specificaties
Kenmerk Waarde
Output Type Analogue, Relay
Supply Voltage 100 → 240 V ac
Size 97 x 97mm
Number of Outputs 3
Minimum Operating Temperature 0°C
Maximum Operating Temperature +55°C
Temperature Range -250 → +300 (Type T Thermocouple) °C, -200 → +1300 (Type N Thermocouple) °C, -200 → +600 (Pt100) °C, -100 → +900 (Type E Thermocouple) °C, -100 → +900 (Type J Thermocouple) °C, -100 → +900 (Type L Thermocouple) °C, -100 → 1300 (Type K Thermocouple) °C, -18 → +1700 (Type R Thermocouple) °C, -18 → +1700 (Type S Thermocouple) °C, -18 → +1800 (Type B Thermocouple) °C
Control Type ON/OFF
Display Type LCD, Multi Line, TFT
IP Rating IP66
Range ControlMaster CM30
Display Colour Green, Red, Yellow
Series CM30
Panel Depth 121mm
7 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
770,12
(excl. BTW)
931,85
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 770,12
Related Products
Set up to 8 programmed patterns with up ...
Description:
Set up to 8 programmed patterns with up to 32 segments (steps) eachHigh-resolution display with 5 digits/0.01°C displayHigh-speed sampling cycle of 60 msThermocouple/Pt input: ±0.1% of PVAnalogue input: ±0.1% FSUniversal inputs on all models (thermocouple, PT, or analog input) to ...
Up to 8 programmed patterns can be set ...
Description:
Up to 8 programmed patterns can be set with up to 32 segments (steps) eachHigh-resolution display with 5 digits/0.01°C display High-speed sampling cycle of 60 ms.Thermocouple/Pt input: ±0.1% of PVAnalogue input: ±0.1% FSUniversal inputs (thermocouple, PT, or analog input) to ...
The series 450 temperature controller offers simplicity of ...
Description:
The series 450 temperature controller offers simplicity of use and high quality of control.The user interface has a complete double display with green LEDs, 4 keys, and two red LEDs to signal active outputs. Universal input configurable from the faceplateInput ...
A compact, fully featured controller for demanding applications.Pro-16 ...
Description:
A compact, fully featured controller for demanding applications.Pro-16 is the only controller of its size, flexible with up to 6 outputs, 2 digital inputs, a remote setpoint input, RS485 communications* and linked to best in class Blue Control software.The Pro-16 ...