- RS-stocknr.:
- 535-8275P
- Fabrikant:
- RS PRO
- RS-stocknr.:
- 535-8275P
- Fabrikant:
- RS PRO
Datasheets
Wetgeving en compliance
Niet conform
- Land van herkomst:
- TW
Productomschrijving
RS PRO 28 V DC, Panel Mount Buzzer, 85 dB Continuous
Wire up this piezo buzzer from RS PRO to generate sounds from your electronic equipment. Safe and simple to install, it emits a continuous tone of up to 85 dB, with a resonant frequency of 2.8 kHz.
In comparison to magnetic buzzers, this piezo buzzer releases sound with a much greater pressure level. It features internal circuitry and you can mount it directly onto a printed circuit board. It includes flying leads, allowing for quick connections, and its ABS (acrylonitrile butadiene styrene) outer construction makes it very resistant to shock and chemicals. Finally, you can use it with a very low current of 4 mA.
This buzzer is safe for use in a temperature range between -30°C and +85°C and has been extensively tested to meet RS PRO standards. It's typically used for alarms and warning devices, as well as telephone dial tones and toy or game sounds.
In comparison to magnetic buzzers, this piezo buzzer releases sound with a much greater pressure level. It features internal circuitry and you can mount it directly onto a printed circuit board. It includes flying leads, allowing for quick connections, and its ABS (acrylonitrile butadiene styrene) outer construction makes it very resistant to shock and chemicals. Finally, you can use it with a very low current of 4 mA.
This buzzer is safe for use in a temperature range between -30°C and +85°C and has been extensively tested to meet RS PRO standards. It's typically used for alarms and warning devices, as well as telephone dial tones and toy or game sounds.
Features and Benefits
Continuous piezo buzzer
Sound level of 76 dB
Resonant frequency of 2.8 kHz
Internal drive
Panel mounting
Supply current of 4 mA
Diameter of 32 mm
Length of 44 mm
Height of 13.5 mm
Minimum operating temperature of -30°C
Maximum operating temperature of +85°C
Minimum supply voltage of 3 V (DC)
Maximum supply voltage of 28 V (DC)
Minimum frequency of 3 kHz
Maximum frequency of 4 kHz
Sound level of 76 dB
Resonant frequency of 2.8 kHz
Internal drive
Panel mounting
Supply current of 4 mA
Diameter of 32 mm
Length of 44 mm
Height of 13.5 mm
Minimum operating temperature of -30°C
Maximum operating temperature of +85°C
Minimum supply voltage of 3 V (DC)
Maximum supply voltage of 28 V (DC)
Minimum frequency of 3 kHz
Maximum frequency of 4 kHz
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards
theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Specificaties
Kenmerk | Waarde |
---|---|
Mounting Type | Panel Mount |
Minimum Supply Voltage | 3V dc |
Maximum Supply Voltage | 12V dc |
Sound Level | 85dB |
Drive Type | Internal |
Tone Type | Continuous |
Diameter | 32mm |
Length | 44mm |
Depth | 13.5mm |
Height | 13.5mm |
Dimensions | 32 (Dia.) x 13.5mm |
Minimum Operating Temperature | -30°C |
Maximum Operating Temperature | +85°C |
Maximum Frequency | 4kHz |
Minimum Frequency | 3000Hz |
Supply Current | 4mA |