Steel Pipe Clamp 37.5mm 10 → 65mm

  • RS-stocknr. 758-8544
  • Fabrikantnummer GC2-INS-M8-M10-400MM
  • Fabrikant Gripple
Datasheets
Wetgeving en compliance
Vrijgesteld
Land van herkomst: GB
Productomschrijving

Universal Clamp

Universal - for pipe sizes 3 / 8in. (DN10) → 2 1 / 2in. (DN65)
Up to 6 times faster than traditional methods
Replaces more than 11 different pipe clamp sizes
Single piece cast construction - not welded
No tools required for installation
No risk of losing screws on site
Ready to use, retractable sleeve set on wire rope
Inherent vibration insulating properties from the wire rope
Easily stored, reduces waste
Easy to calculate the quantity on a project plan
Load rated at 45 kg with a safety factor 5:1

Note

Load Test and Vibration Test results available see datasheets attached

Standards

Wire rope conforms to EN 123485, Retractable Sleeve: ISO 3795, CEI 754-1, CEI 754-2, ROHS Compliant

Note

Load Test and Vibration Test results available see datasheets attached

Standards

EN123485, Retractable Sleeve: ISO 3795, CEI 754-1, CEI 754-2

Specificaties
Kenmerk Waarde
For Nominal Diameter 37.5mm
Material Steel
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 20-08-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each (In a Bag of 10)
3,032
(excl. BTW)
3,669
(incl. BTW)
Aantal stuks
Per stuk
Per zak*
10 +
€ 3,032
€ 30,32
*prijsindicatie
Related Products
A range of P-clips for secure clamping of ...
Description:
A range of P-clips for secure clamping of pipes, conduits and cables. Available in bright zinc plated steel or A2 grade 18 / 8 stainless steelSupplied with TPE or PVC liners to prevent chafing of pipe, cable, etc.Temperature range -30°C ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...
Galvanised steel 1-piece pipe clamps, which require a ...
Description:
Galvanised steel 1-piece pipe clamps, which require a cone-point screw (stock no. 767-444) and channel nut (stock nos. 176-040 or 176-034) for assembly to either 21mm or 41mm channel section. For Clamp Width see Dimension B on the line drawing. ...