Oilseal Pipe & Thread Sealant Liquid for Jointing. 300 g Tin, -50 → +200 °C

  • RS-stocknr. 129-527
  • Fabrikantnummer 28032
  • Fabrikant Rocol
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: GB
Productomschrijving

Oil Seal

A white thixotropic liquid which sets hard to form a pressure tight seal
Resistant to oil and unaffected by vibration
Use to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffin
Can be used for air, water steam and most gases except oxygen
Resistant to all Oils, White Spirit, Paraffin

Specificaties
Kenmerk Waarde
Application Jointing
Colour White
Minimum Operating Temperature -50°C
Maximum Operating Temperature +200°C
Package Size 300 g
Product Form Liquid
Trade Name Oilseal
Package Type Tin
Operating Temperature Range -50 → +200 °C
Op voorraad - levertijd 4 à 5 werkdagen.
Prijs Each
21,33
(excl. BTW)
25,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 21,33
Related Products
Water-based spatter agent which gives exceptional results without ...
Description:
Water-based spatter agent which gives exceptional results without the use of harmful solvents, silicones or mineral oils. Odourless, non-flammable and safe in useFine spray pattern ensures total control and economical coveragePrevents spatter adhesion on welding equipment, work pieces,surfaces, jigs and ...
3M™ Hybrid Adhesive Sealant 760 is a single ...
Description:
3M™ Hybrid Adhesive Sealant 760 is a single component, high strength, elastomeric sealant. This hybrid technology is paintable when wet and will not degrade when exposed to UV. Excellent adhesionPaintable when wetAbove/below water line useLow VOC30 Minute skin time.
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
For medium strength applicationsSuitable for sealing of pipe ...
Description:
For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsWhen fully cured the sealant can withstand pressures in excess of 200 barIt is suitable for mild steel, cast iron, stainless steel and galvanised pipes.