Loctite 577 Pipe & Thread Sealant Paste for Thread Sealing. 250 ml Tube, -55 → +150 °C

  • RS-stocknr. 496-079
  • Fabrikantnummer LOCTITE® 577
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Threaded Pipe Sealant 577

For medium strength applications
Suitable for sealing of pipe fittings and coarse threaded components
When fully cured the sealant can withstand pressures in excess of 200 bar
It is suitable for mild steel, cast iron, stainless steel and galvanised pipes

Loctite Sealant PasTE For Thread Sealing

The Loctite yellow 250ml gasket sealant paste is a general-purpose thread sealant for straight/straight and straight/taper threads and fittings. It fills the space between threaded parts and seals and locks at the same time. This paste is composed of methacrylate and has an excellent chemical and thermal resistance. It is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. This product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. The product offers less migration of liquid product after application.

Features and Benefits


When fully cured, the sealant can withstand pressure more than 200bar
• Chemical ingredient present is methacrylate
• Medium strength
• Chemical ingredient present is methacrylate
• Higher-strength on contaminated surfaces
• High viscosity, thixotropic
• Improved thermal performance
• Offers gap performance to 0.25 mm
• Operating temperature ranges between -55°C and 150°C
• high-performance on passive metals without an activator
• Easy to apply

Applications


For medium strength applications
• Suitable for sealing of pipe fittings and coarse threaded components
• Thread sealing

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007
• DVGW approved

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour Yellow
Strength Medium
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 250 ml
Product Form Paste
Trade Name Loctite 577
Chemical Ingredients Methacrylate
Package Type Tube
Anaerobic Yes
Operating Temperature Range -55 → +150 °C
Special Features Anaerobic
11 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
90 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
118,41
(excl. BTW)
143,28
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 118,41
Related Products
The ITW Devcon epoxy putty is a two-part, ...
Description:
The ITW Devcon epoxy putty is a two-part, steel-filled liquid substance that can be cast over models for accurate detail reproduction. It can be used for holding fixtures, light-gauge forming dies, and moulds. Fast curing and self levelling compound Reproduces ...
White, semi-paste resin, ideal for sealing pipes and ...
Description:
White, semi-paste resin, ideal for sealing pipes and unions up to 2 inches.Can be used for easy removal of parts such as unions and large diameter caps with a fine thread.Calorétanche hardens in several hours and is resistant to most ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.