Loctite 574 Pipe & Thread Sealant Paste for Jointing. 50 ml Bottle, -55 → +150 °C

  • RS-stocknr. 496-085
  • Fabrikantnummer 267437
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Multi Gasket 574

General purpose flange sealant
Typical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe work
Thixotropic to avoid run-off during vertical application
Cures rapidly to give a high pressure seal, which resists most industrial fluids and gases
Resistant to Industrial Fluids, Gases

Loctite Gasket Sealant Liquid

The Loctite orange 50ml pipe and thread sealant paste seals close-fitting joints between rigid metal faces and flanges. This product cures when confined in the absence of air between close-fitting metal surfaces. This liquid is composed of methacrylate and requires no mixing. It provides resistance to low-pressures immediately after assembly of flanges. Typically used as a form-in-place gasket on rigid flanged connections (gearbox and engine casings). The thixotropic nature of LOCTITE® 574™ reduces the migration of liquid product after application to the substrate.

Features and Benefits


High oil resistance
• Excellent water and glycol resistance
• Medium strength
• Viscosity: Thixotropic
• Operating temperature ranges between -55°C and 250°C

Applications


Hydraulic and pneumatic control valves
• Transmission and engine flanges
• Marine pipe work

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Application Jointing
Colour Orange
Strength Medium
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 50 ml
Product Form Paste
Trade Name Loctite 574
Chemical Ingredients Methacrylate
Package Type Bottle
Anaerobic Yes
Special Features Anaerobic
Operating Temperature Range -55 → +150 °C
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 07-01-2020, met een levertijd van 2 à 3 werkdagen.
Prijs Each
31,25
(excl. BTW)
37,81
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 31,25
Related Products
White, semi-paste resin, ideal for sealing pipes and ...
Description:
White, semi-paste resin, ideal for sealing pipes and unions up to 2 inches.Can be used for easy removal of parts such as unions and large diameter caps with a fine thread.Calorétanche hardens in several hours and is resistant to most ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
The Loctite white 100ml pipe and thread sealant ...
Description:
The Loctite white 100ml pipe and thread sealant gel for thread sealing is recommended for use on plastic pipe threaded fittings carrying hot or cold water. This product cures at ambient temperatures under the influence of atmospheric moisture to form ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.