Loctite 222 Pipe & Thread Sealant Liquid for Threadlocking. 10 ml Bottle, -55 → +150 °C

  • RS-stocknr. 514-509
  • Fabrikantnummer 267358
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite® 222 Threadlocking Adhesives

Lower strength threadlocking grade for fasteners requiring subsequent adjustment
Distinctive purple colour to aid identification
Thixotropic to prevent migration from the point of application
Lubricates threads during assembly
Easy to remove components
Ideal for non-ferrous components e.g. brass and aluminium

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

Loctite Pipe & Thread Sealant Liquid

The Loctite purple 10ml pipe and thread sealant liquid is designed for locking and sealing of threaded fasteners, which require easy disassembly with standard hand tools. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This product is composed of methacrylate and requires no mixing. It is particularly suitable for applications such as adjustment of set screws, small diameter or long engagement length fasteners, where easy disassembly is required without shearing the screw. Its thixotropic nature reduces the migration of liquid product after application to the substrate.
Note
Testing should be carried out before contact with styrene, acrylic and polycarbonate-based plastics to ensure compatibility.

Features and Benefits

• Cure time is 6 hours
• Easy to remove components

Low strength
• Low viscosity, thixotropic
• Lubricates threads during assembly
• Operating temperature ranges between -55°C and 150°C
• Prevents loosening on vibrating assemblies like pumps, gearboxes and presses
• Permits disassembly with hand tools

Applications


Ideal for low-strength thread locking of adjusting screws, countersunk head screws and set screws
• Especially suited to small thread sizes
• Ideal for non-ferrous components like brass and aluminium
• Thread locking

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Application Threadlocking
Colour Purple
Strength Low
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 10 ml
Product Form Liquid
Trade Name Loctite 222
Chemical Ingredients Methacrylate
Package Type Bottle
Anaerobic Yes
Cure Time 6 h
Operating Temperature Range -55 → +150 °C
Special Features Anaerobic
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
575 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
10,77
(excl. BTW)
13,03
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 10,77
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
Loctite 572 is a white, slow curing pipe ...
Description:
Loctite 572 is a white, slow curing pipe and thread sealant designed to give you an instant seal to stop gasses and liquids from leaking. Designed for metal pipes and fittings, Loctite 572 offers a breakaway torque of 7 Nm. ...
Red-coloured anaerobic resin used for sealing machined parts ...
Description:
Red-coloured anaerobic resin used for sealing machined parts subjected to continuous operating temperatures up to 200 °C, fluids and corrosive industrial gases.Instant low pressure sealing.Replaces damaged seals and sealant pastes.
White, semi-paste resin, ideal for sealing pipes and ...
Description:
White, semi-paste resin, ideal for sealing pipes and unions up to 2 inches.Can be used for easy removal of parts such as unions and large diameter caps with a fine thread.Calorétanche hardens in several hours and is resistant to most ...