Loctite 577 Gasket Sealant Paste for Thread Sealing. 50 ml Bottle, -55 → +150 °C

  • RS-stocknr. 514-571
  • Fabrikantnummer Loctite 577
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Threaded Pipe Sealant 577

For medium strength applications
Suitable for sealing of pipe fittings and coarse threaded components
When fully cured the sealant can withstand pressures in excess of 200 bar
It is suitable for mild steel, cast iron, stainless steel and galvanised pipes

Loctite Sealant PasTE For Thread Sealing

The Loctite yellow 50ml gasket sealant paste is a general-purpose thread sealant for straight/straight and straight/taper threads and fittings. It fills the space between threaded parts and seals and locks at the same time. This paste is composed of methacrylate and has an excellent chemical and thermal resistance. It is designed for the locking and sealing of metal pipes and fittings as well as other threaded assemblies. This product provides an instant, low-pressure seal for metal pipes and fittings. It will not creep, shrink or shred. The product offers less migration of liquid product after application.

Features and Benefits


When fully cured, the sealant can withstand pressure more than 200bar
• Chemical ingredient present is methacrylate
• Medium strength
• Chemical ingredient present is methacrylate
• Higher-strength on contaminated surfaces
• High viscosity, thixotropic
• Improved thermal performance
• Offers gap performance to 0.25 mm
• Operating temperature ranges between -55°C and 150°C
• high-performance on passive metals without an activator
• Easy to apply

Applications


For medium strength applications
• Suitable for sealing of pipe fittings and coarse threaded components
• Thread sealing

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007
• DVGW approved

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour Yellow
Strength Medium
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 50 ml
Product Form Paste
Trade Name Loctite 577
Chemical Ingredients Methacrylate
Package Type Bottle
Anaerobic Yes
Special Features Anaerobic
Operating Temperature Range -55 → +150 °C
57 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
578 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
32,07
(excl. BTW)
38,80
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 32,07
6 - 14
€ 30,79
15 +
€ 30,15
Related Products
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill ...
Description:
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill not clog valves or fine filters and has a thixotropic quality which prevents migration of the sealantImpervious to all common hydraulic fluids including fire-resistant syntheticsResistant to Hydraulic Fluids including Synthetics.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.