Loctite 572 low strength pipeseal 50ml

  • RS-stocknr. 127-1375
  • Fabrikantnummer LOCTITE 572
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Loctite 572

Loctite 572 is a white, slow curing pipe and thread sealant designed to give you an instant seal to stop gasses and liquids from leaking. Designed for metal pipes and fittings, Loctite 572 offers a breakaway torque of 7 Nm.

This Loctite thread sealant is methacrylate based, and is thixotropic to reduce migration after application.

Features and Benefits

Slow curing means that you have time to adjust your fittings Use for thread sizes up to M80
Suitable for use on coarse threads
Seals to burst strength on most pipe systems when it is fully cured

Loctite Gasket Sealant Liquid

The Loctite white 50ml gasket sealant white liquid is designed for the locking and sealing of metal pipes and fittings. This product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This liquid is composed of Amorphous, Crystal-free, Cumene, Cumene Hydroperoxide, Ethene, Fluorphlogopite, Fumed, Homopolymer, Octan-1-Ol, Polyglycol Dimethacrylate, Polyglycol Dioctanoate, Silica, Tetrafluoro and Titanium Dioxide. Its thixotropic nature reduces the migration of liquid product after application to the substrate.

Features and Benefits

• Cure time is a minimum of 24 hours
• High viscosity, thixotropic

Medium strength
• Has a specific gravity of 1.08
• Slow curing means that you have time to adjust your fittings
• Use for thread sizes up to M80
• Suitable for use on coarse threads
• Seals to burst strength on most pipe systems when it is fully cured
• Offers a breakaway torque of 7Nm

Applications


Threaded sealing
• Suitable for thread sizes up to M80

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour White
Strength Medium
Package Size 50 ml
Product Form Liquid
Trade Name Loctite 572
Chemical Ingredients Dimethacrylate Ester
Package Type Bottle
Cure Time Minimum of 24 h
Special Features Anaerobic Cure, Cures when Confined in the Absence of Air Between Close Fitting Metal Surfaces, Prevents Loosening & Leakage from Shock & Vibration
Chemical Composition Amorphous, Crystal-free, Cumene, Cumene Hydroperoxide, Ethene, Fluorphlogopite, Fumed, Homopolymer, Octan-1-Ol, Polyglycol Dimethacrylate, Polyglycol Dioctanoate, Silica, Tetrafluoro, Titanium Dioxide
Specific Gravity 1.08
Viscosity Measurement 28800 → 77000mPa/s
20 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
188 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
25,96
(excl. BTW)
31,41
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 25,96
Related Products
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill ...
Description:
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill not clog valves or fine filters and has a thixotropic quality which prevents migration of the sealantImpervious to all common hydraulic fluids including fire-resistant syntheticsResistant to Hydraulic Fluids including Synthetics.
Single component anaerobic sealantFor use on stainless steel ...
Description:
Single component anaerobic sealantFor use on stainless steel and aluminium threadsAnti-gallingWater Research Council approved (hot or cold water)For threads and pipe fittings up to 2 inchCan be used in the chemical, petroleum, gas, marine industriesResistant to Chemicals, Petroleum, Gas.