LOCTITE 510 Pipe & Thread Sealant Paste for Thread Sealing. 50 ml Tube, -55 → +150 °C

  • RS-stocknr. 160-8891
  • Fabrikantnummer INSTAJOINT 510
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Rigid Instajoint 510

Red-coloured anaerobic resin used for sealing machined parts subjected to continuous operating temperatures up to 200 °C, fluids and corrosive industrial gases.
Instant low pressure sealing.
Replaces damaged seals and sealant pastes.

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour White
Strength Low
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 50 ml
Product Form Paste
Trade Name Loctite 510
Chemical Ingredients Methacrylate
Package Type Tube
Operating Temperature Range -55 → +150 °C
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
42 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
35,19
(excl. BTW)
42,58
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 35,19
Related Products
Resin Remover RRS is a blend of solvents ...
Description:
Resin Remover RRS is a blend of solvents designed to soften and dissolve cured resins. Solvents to remove hardened casting resinsMay be used for reworking electronic devicesSuitable for use on production equipment, jigs, tools, etc.Contains no methylene chloride.
Alternative to pastes, hemp and PTFE tapeSeals domestic ...
Description:
Alternative to pastes, hemp and PTFE tapeSeals domestic and industrial pipe threadsSuitable for use on portable water systems up to 82°CCertified to ANSI/NSF standard 61Steam compatibility 130°C @ 25psiWRC listed and meets BS6920Corgi approved for use with gas fittingsAvailable in ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
A one-component silicone sealant that gives excellent adhesion ...
Description:
A one-component silicone sealant that gives excellent adhesion to most non-porous surfaces. High modulus acetoxy cure typeFast cure, tack free in one hour5-10 minutes working timeJoint movement capability ±25%Contains fungicide to resist mould growthConforms to BS5889 type B, ISO11600-F-20HMAvailable in ...