Loctite 572 Pipe & Thread Sealant Gel for Thread Sealing. 50 ml Tube, -55 → +150 °C

  • RS-stocknr. 187-6555
  • Fabrikantnummer 572
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Calorétanche 572

White, semi-paste resin, ideal for sealing pipes and unions up to 2 inches.
Can be used for easy removal of parts such as unions and large diameter caps with a fine thread.
Calorétanche hardens in several hours and is resistant to most fluids and industrial gases after polymerisation.

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour White
Strength Medium
Minimum Operating Temperature -55°C
Maximum Operating Temperature +150°C
Package Size 50 ml
Product Form Gel
Trade Name Loctite 572
Chemical Ingredients Methacrylate
Package Type Tube
Anaerobic Yes
Cure Time 72 h
Operating Temperature Range -55 → +150 °C
Special Features Anaerobic
5 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
21 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
27,37
(excl. BTW)
33,12
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 27,37
Related Products
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
For medium strength applicationsSuitable for sealing of pipe ...
Description:
For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsWhen fully cured the sealant can withstand pressures in excess of 200 barIt is suitable for mild steel, cast iron, stainless steel and galvanised pipes.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.