Loctite 5331 Pipe & Thread Sealant Liquid for Thread Sealing. 100 ml Syringe, -50 → +150 °C

  • RS-stocknr. 330-3920
  • Fabrikantnummer 142492
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Silicone Plastic Pipe Sealant 5331

For flexible plastic and plastic to metal fittings
Low strength
Low pressure instant seal; 0.5 bar on 1 inch fittings
Water Research Council approved (hot and cold water)
Cures within 12 hours
Sealing capacity up to 3 bar in water at 90°C

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour White
Strength Low
Minimum Operating Temperature -50°C
Maximum Operating Temperature +150°C
Package Size 100 ml
Product Form Liquid
Trade Name Loctite 5331
Chemical Ingredients Silicone
Package Type Syringe
Cure Time 12 h
Operating Temperature Range -50 → +150 °C
18 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
102 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
28,04
(excl. BTW)
33,93
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 28,04
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill ...
Description:
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill not clog valves or fine filters and has a thixotropic quality which prevents migration of the sealantImpervious to all common hydraulic fluids including fire-resistant syntheticsResistant to Hydraulic Fluids including Synthetics.
For medium strength applicationsSuitable for sealing of pipe ...
Description:
For medium strength applicationsSuitable for sealing of pipe fittings and coarse threaded componentsWhen fully cured the sealant can withstand pressures in excess of 200 barIt is suitable for mild steel, cast iron, stainless steel and galvanised pipes.