Loctite 567 Pipe & Thread Sealant Paste for Thread Sealing. 50 ml Tube, -55 → +200 °C

  • RS-stocknr. 330-3942
  • Fabrikantnummer 135491
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IE
Productomschrijving

Anaerobic Pipe Sealant 567

Single component anaerobic sealant
For use on stainless steel and aluminium threads
Anti-galling
Water Research Council approved (hot or cold water)
For threads and pipe fittings up to 2 inch
Can be used in the chemical, petroleum, gas, marine industries
Resistant to Chemicals, Petroleum, Gas

Note

Manufacturer recommends use of activator Loctite N7649 (Stock No. 108-716) with this pipe sealant

Loctite Pipe & Thread Sealant Paste

The Loctite white 50ml pipe and thread sealant paste is designed for the locking and sealing of metal tapered threads and fittings. The product cures when confined in the absence of air between close-fitting metal surfaces and prevents loosening and leakage from shock and vibration. This paste is composed of methacrylate ester and is best suited for use on coarse metal threads. The high lubricating properties of this compound prevent galling on stainless steel, aluminium, and all other metal pipe threads and fittings.

Features and Benefits

• Clean and easy to apply
• Cure time is
• Does not creep, shrink or block systems

Low strength
• Single component anaerobic sealant
• Resistant to Chemicals, Petroleum, Gas
• Its breakaway torque rating is 1.7Nm
• Viscosity is 280,000 to 800,000mPa s
• Operating temperature ranges between -55°C and 200°C
• Provides an instant low-pressure seal

Applications

• Automotive industry

For threads and pipe fittings up to 2in
• Chemical industry
• Petroleum industry
• Gas industry
• Marine industry
• Power systems
• Waste treatment

Certifications


UL approved
• ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Application Thread Sealing
Colour White
Strength Low
Minimum Operating Temperature -55°C
Maximum Operating Temperature +200°C
Package Size 50 ml
Product Form Paste
Trade Name Loctite 567
Chemical Ingredients Methacrylate
Package Type Tube
Anaerobic Yes
Special Features Anaerobic
Operating Temperature Range -55 → +200 °C
12 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
209 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
27,02
(excl. BTW)
32,69
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 27,02
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
Red-coloured anaerobic resin used for sealing machined parts ...
Description:
Red-coloured anaerobic resin used for sealing machined parts subjected to continuous operating temperatures up to 200 °C, fluids and corrosive industrial gases.Instant low pressure sealing.Replaces damaged seals and sealant pastes.
White, semi-paste resin, ideal for sealing pipes and ...
Description:
White, semi-paste resin, ideal for sealing pipes and unions up to 2 inches.Can be used for easy removal of parts such as unions and large diameter caps with a fine thread.Calorétanche hardens in several hours and is resistant to most ...
Resin with PTFE for sealing large pipes and ...
Description:
Resin with PTFE for sealing large pipes and stainless steel threads in industrial installations: water, low-pressure steam, air, hydraulic fluids, nitrogen, etc.Lubricating effect to assist with assembly and prevent thread damage.