Loctite 243 Pipe & Thread Sealant Liquid for Threadlocking. 50 ml Bottle, -55 → +180 °C

  • RS-stocknr. 408-4080
  • Fabrikantnummer 1335885
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: GB
Productomschrijving

Loctite® 243 Threadlocking

Medium strength oil tolerant torque tension grade
General purpose threadlocking
Particularly suitable for less active surfaces e.g. stainless steel
Prevents loosening through vibration and leakage of threaded fasteners

Note

Testing should be carried out prior to contact with styrene, acrylic and polycarbonate based plastics to ensure compatibility.

This Loctite 243 is designed for the locking and sealing of threaded fasteners which require normal disassembly with standard hand tools. It offers high temperature performance and oil tolerance.

Features:

• Technology: Acrylic
• Chemical Type: Dimethacrylate ester
• Fluorescence: Positive under UV light
• Components: One component - requires no mixing
• Viscosity: Medium, thixotropic
• Cure: Anaerobic
• Secondary: Cure Activator
• Application: Threadlocking
• Strength: Medium

How to use Loctite 243?

• Clear all surfaces (external and internal) with a cleaning solvent and allow to dry
• Cure speed too slow? You need to use appropriate activator and then allow to dry it when needed
• Shake it before use
• To prevent the Loctite 243 from clogging in the nozzle, avoid tip and metal surface get in contact during application
• Store in dry location

How to clean Loctite 243 after using?

It could be removed with a combination of soaking in a solvent and wire brush.

Where can you use Loctite 243?

It works on active metals such as brass or copper as well as on passive substrates ie. stainless steel and plated surfaces.

Threadlocking and Retainers

Specificaties
Kenmerk Waarde
Application Threadlocking
Colour Blue
Strength Medium
Minimum Operating Temperature -55°C
Maximum Operating Temperature +180°C
Package Size 50 ml
Product Form Liquid
Trade Name Loctite 243
Chemical Ingredients Methacrylate
Package Type Bottle
Anaerobic Yes
Cure Time 2 h
Special Features Anaerobic
Operating Temperature Range -55 → +180 °C
22 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
929 op voorraad - levertijd is 2 werkdag(en) (UK-voorraad)
Prijs Each
49,45
(excl. BTW)
59,83
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 49,45
Related Products
A white thixotropic liquid which sets hard to ...
Description:
A white thixotropic liquid which sets hard to form a pressure tight sealResistant to oil and unaffected by vibrationUse to seal threaded and face joints that are subjected to mineral, fuel and vegetable oils, white spirit and paraffinCan be used ...
General purpose flange sealantTypical applications include hydraulic and ...
Description:
General purpose flange sealantTypical applications include hydraulic and pneumatic control valves, transmission and engine flanges and marine pipe workThixotropic to avoid run-off during vertical applicationCures rapidly to give a high pressure seal, which resists most industrial fluids and gasesResistant to ...
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill ...
Description:
Medium viscosityFor sealing threaded hydraulic and pneumatic partsWill not clog valves or fine filters and has a thixotropic quality which prevents migration of the sealantImpervious to all common hydraulic fluids including fire-resistant syntheticsResistant to Hydraulic Fluids including Synthetics.
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.