LOCTITE SI 5980 Pipe & Thread Sealant Paste for Gasket Sealing. 100 ml Tube, -55 → +250 °C

  • RS-stocknr. 812-5352
  • Fabrikantnummer Loctite 5980
  • Fabrikant Loctite
Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

Black Gasket Sealant

Specially designed for gasketing applications this lump-free, black gasket sealant provides excellent resistance to automotive engine oils.
This Loctite ready-to-use flange sealant is ideal for flanges with permanent oil contact.

Features:

Low modulus (high flexibility)
Non-corrosive
Energy-neutral cure
Odour-free
Resistant to oil

Applications – both metal and plastic flanges:

Inlet manifold
Oil pan
Transmission cover
Valve cover
Cooling system
Water pump
Thermostat
Transmission pan
Timing chain cover

Loctite Pipe & Thread Sealant Paste

The Loctite black 100ml pipe and thread sealant paste for gasket sealing is designed specifically for gasketing applications. It withstands online, low-pressure tests carried out before the product begins to cure. This product is composed of alkoxy silicone. Typical applications include stamped sheet metal covers (timing covers and oil sumps) where good oil resistance and the ability to withstand high joint-movement is required.

Features and Benefits

• Cure time is 0.5 hours

High strength
• Excellent oil resistant
• Good glycol resistance
• Operating temperature ranges between -55°C and 250°C
• Leading in health and safety features

Applications


Gasket sealing
• Flange sealant

Certifications


ANSI/ESD S20.20:2014
• BS EN 61340-5-1:2007

Specificaties
Kenmerk Waarde
Application Gasket Sealing
Colour Black
Strength High
Minimum Operating Temperature -55°C
Maximum Operating Temperature +250°C
Package Size 100 ml
Product Form Paste
Trade Name Loctite SI 5980
Chemical Ingredients Silicone
Package Type Tube
Cure Time 0.5 h
Operating Temperature Range -55 → +250 °C
43 op voorraad - levertijd is 2 werkdag(en).
Prijs Each
9,90
(excl. BTW)
11,98
(incl. BTW)
Aantal stuks
Per stuk
1 - 5
€ 9,90
6 - 14
€ 9,50
15 +
€ 9,31
Related Products
Lower strength threadlocking grade for fasteners requiring subsequent ...
Description:
Lower strength threadlocking grade for fasteners requiring subsequent adjustmentDistinctive purple colour to aid identificationThixotropic to prevent migration from the point of applicationLubricates threads during assemblyEasy to remove componentsIdeal for non-ferrous components e.g. brass and aluminium.
The Loctite white 100ml pipe and thread sealant ...
Description:
The Loctite white 100ml pipe and thread sealant gel for thread sealing is recommended for use on plastic pipe threaded fittings carrying hot or cold water. This product cures at ambient temperatures under the influence of atmospheric moisture to form ...
For flexible plastic and plastic to metal fittingsLow ...
Description:
For flexible plastic and plastic to metal fittingsLow strengthLow pressure instant seal; 0.5 bar on 1 inch fittingsWater Research Council approved (hot and cold water)Cures within 12 hoursSealing capacity up to 3 bar in water at 90°C.
Resin with PTFE for sealing large pipes and ...
Description:
Resin with PTFE for sealing large pipes and stainless steel threads in industrial installations: water, low-pressure steam, air, hydraulic fluids, nitrogen, etc.Lubricating effect to assist with assembly and prevent thread damage.