RS PRO Opaque Fluoroplastics PTFE Rod, 1m x 10mm Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: IT
Productomschrijving

PTFE (Extruded)

Extremely high chemical resistance
Wide temperature range - maximum service temperature 260°C
Low friction and low adhesion
Resistant to Radiation
Excellent dielectric performance

Note

The PTFE sheets supplied have a size tolerance of ±5 mm

Standards

DIN 53479; DIN 53736; ASTM-D 1929

Specificaties
Kenmerk Waarde
Colour Opaque
Length 1m
Material PTFE
Form Rod
Rod Diameter 10mm
Density 2.18 → 2.21g/cm³
Tensile Strength 25 MPa
Flammability Rating UL 94 V-0
Maximum Operating Temperature +260°C
Water Absorption 0.3%
Hardness 30 Ball Indentation
Elongation 50%
32 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
23 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Lot of 5
47,02
(excl. BTW)
56,89
(incl. BTW)
Lot(s)
Per lot
Per stuk*
1 - 2
€ 47,02
€ 9,404
3 - 5
€ 43,72
€ 8,744
6 - 11
€ 41,37
€ 8,274
12 +
€ 37,62
€ 7,524
*prijsindicatie
Related Products
Low moisture absorption and good chemical resistance with ...
Description:
Low moisture absorption and good chemical resistance with excellent mechanical strength. Dimensionally stable, suitable for close tolerance components, bearings, bushes, gears, valves and valve seatings. White in colour.
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light. Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long ...
Description:
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long term to hot water (60°C)High storage stiff thermoplasticExcellent sliding properties/wear and abrasion resistantAcid, solvent and chemical resistantFor all bearing, bush, gear, insulator applicationsOpaque.