RS PRO Grey Polyvinyl Chloride PVC Rod, 1m x 10mm Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Grey PVC Plastic Stock

Good mechanical strength
Resistant to most chemicals
Easily fabricated and machined
Uses include: chemical plant-tanks, electrical components, valves and pumps
Maximum service temperature 60°C

Specificaties
Kenmerk Waarde
Colour Grey
Length 1m
Material PVC
Form Rod
Rod Diameter 10mm
Density 1.47g/cm³
Tensile Strength 55 MPa
Flammability Rating UL 94 V-0
Elongation 20%
Maximum Operating Temperature +60°C
Hardness 130 Ball Indentation
Water Absorption 0.2%
10 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
67 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Lot of 5
8,49
(excl. BTW)
10,27
(incl. BTW)
Lot(s)
Per lot
Per stuk*
1 - 2
€ 8,49
€ 1,698
3 - 5
€ 7,89
€ 1,578
6 - 11
€ 7,46
€ 1,492
12 +
€ 6,79
€ 1,358
*prijsindicatie
Related Products
Macor® is a registered trademark of Corning Inc. ...
Description:
Macor® is a registered trademark of Corning Inc. For the manufacture of precision components utilising ordinary metalworking toolsNo post firing requiredNon-wetting, 0% porosity and no deformationMax no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm (polished ...
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light. Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Black extruded Nylon 6 containing MoS2. Good sliding ...
Description:
Black extruded Nylon 6 containing MoS2. Good sliding and dry running propertiesResistant to oils, grease, petrol etc.Easily welded, bonded, machined and polishedUV and weather resistantSuitable for friction bearings/strips, gears, castors, pulleys, chains, wheels and machine parts etcBlack in colourTolerance ...