RS PRO Beige Polyetheretherketone PEEK Rod, 300mm x 10mm Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

Victrex® PEEK 450G

Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc.

Continuous working temperature approx 250°C
No significant degradation in steam or high pressure water environments
Can absorb over 1000 Mrads of radiation without appreciable loss of mechanical properties
Excellent resistance to a wide range of organic and inorganic liquids, and resistant to all common solvents
Fawn in colour

Note

No. Per Lot is 1

Standards

DIN 53479; DIN 53765; DIN 53765-D-10; ASTM-D 1929

Specificaties
Kenmerk Waarde
Colour Beige
Length 300mm
Material PEEK
Form Rod
Rod Diameter 10mm
Density 1.32g/cm³
Tensile Strength 95 MPa
Flammability Rating UL 94 V-0
Elongation 25%
Maximum Operating Temperature +260°C
Water Absorption 0.5%
Hardness M 99 Rockwell
35 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
30 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs 1 Lot of 1
12,85
(excl. BTW)
15,55
(incl. BTW)
Lot(s)
1 - 2
€ 12,85
3 - 5
€ 11,95
6 - 11
€ 11,31
12 +
€ 10,28
Related Products
Macor® is a registered trademark of Corning Inc. ...
Description:
Macor® is a registered trademark of Corning Inc. For the manufacture of precision components utilising ordinary metalworking toolsNo post firing requiredNon-wetting, 0% porosity and no deformationMax no load temperature: 1000°CContinuous operating temperature: 800°CMachining tolerances approach 0.013mm (polished ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light. Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Black extruded Nylon 6 containing MoS2. Good sliding ...
Description:
Black extruded Nylon 6 containing MoS2. Good sliding and dry running propertiesResistant to oils, grease, petrol etc.Easily welded, bonded, machined and polishedUV and weather resistantSuitable for friction bearings/strips, gears, castors, pulleys, chains, wheels and machine parts etcBlack in colourTolerance ...
PEEK GF30 is a 30% glass fibre reinforced ...
Description:
PEEK GF30 is a 30% glass fibre reinforced material offering extremely high dimensional stability together with very high thermal-mechanical strength. Suitable for use in highly demanding applications including thermal/electrical insulators, plug parts, high thermal/mechanical loaded parts and support rings etc. ...