RS PRO Brown Polyimide PI Rod, 250mm x 13mm Diameter

Datasheets
Wetgeving en compliance
Conform
Land van herkomst: DE
Productomschrijving

TECASINT 2011 (Polyimide)

Providing high strength with a low level of creep and good wear resistance up to 300°C in continuous use. Suitable for thermally and mechanically stressed engineering elements and components.

Dimensional stability
Electrical insulation
High purity
Low outgassing
Inherently flame retardant
Good radiation
Easily machined to close tolerances

Max Service Temperature (Long Term) 300°C
Elongation 4.5 %
Tensile Strength 118 MPA
Flammability Rating UL 94 V-0
Water Absorption 0.47 %
Specificaties
Kenmerk Waarde
Colour Brown
Length 250mm
Material Polyimide
Form Rod
Rod Diameter 13mm
Density 1.38g/cm³
Impact Strength 9.8kJ/m²
Tensile Strength 118 MPa
Flammability Rating UL 94 V-0
Hardness Shore D 90
Suitability Food & Semiconductor Technology, Friction Rings, Insulators, Medical, Switch Parts, Valve Faces
Maximum Operating Temperature +300°C
Water Absorption 3.38%
Elongation 6.1%
Thermal Conductivity 0.22W/mK
2 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
372,69
(excl. BTW)
450,95
(incl. BTW)
Aantal stuks
Per stuk
1 - 2
€ 372,69
3 - 5
€ 346,61
6 - 11
€ 327,97
12 +
€ 298,16
Related Products
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long ...
Description:
Easily welded/bondedVery good electrical insulationEasily machined/polishedNot resistant long term to hot water (60°C)High storage stiff thermoplasticExcellent sliding properties/wear and abrasion resistantAcid, solvent and chemical resistantFor all bearing, bush, gear, insulator applicationsOpaque.
Typical applications include valve seats in steam and ...
Description:
Typical applications include valve seats in steam and water mixers, components in a high temperature diesel engine turbo actuators etc. Continuous working temperature approx 250°CNo significant degradation in steam or high pressure water environmentsCan absorb over 1000 Mrads of radiation ...
Environmental: Glass filled Nylon 66 is unaffected by ...
Description:
Environmental: Glass filled Nylon 66 is unaffected by ultra-violet light. Strong acids (pH>3) will cause dimensional change due to absorption. Strong alkalis (pH>11) have no affect. Hot water and chlorinated hydrocarbons produce signs of mild attack by absorption. High temperature ...
Natural colour cast Nylon 6. Free of internal ...
Description:
Natural colour cast Nylon 6. Free of internal stressesHigh tensile and impact strengthChemical, acid and alkali resistantHigh abrasion resistanceLow finished component countSuitable for all bearing, bush and gear applicationsNatural colour.