Schneider Electric Cord Set for use with Modicon M340

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

Modicon M340 40 Way Terminal Connector/ Flying Leads

Pre-formed 40-way cordsets with flying leads

Schneider Electric Modicon M340 PLC

Equipped with astounding memory and performances, this featherweight version will inspire your applications with new momentum. Designed to operate in total synergy with other Schneider Electric devices, Modicon M340 a building block towards your total solution.

Performance

Data rate: 20kb/s to 1Mb/s (bus length dependent)
Internal RAM capacity: 4Mb (3584kb of program memory); 256kb of data memory

Compact design

3 communication ports integrated in the processor
Mounting in low depth cabinet (<150mm)
High-density discrete I/O modules with 64 channels in a 32mm wide format

Communicative, with its integrated ports

CANopen machine and installation bus
Ethernet TCP/IP network - Transparent Ready
Modbus serial link or character mode
Remote access via STN, GSM, Radio or ADSL

Expert

Counter modules with ready-to-use functions
Function block library dedicated to motion control. MF(Motion Function Blocks) to the PLCopen standard
Advanced library of process control blocks oriented towards control of machinery

Innovative and Ruggedness

USB port as standard
Embedded webserver
Recipe file management via FTP protocol
“Plug and Load” SD memory card
No batteries
Rack architecture enabling hot swapping of modules during operation (Hot-Swap)
Exceeds the standards in terms of shocks, vibrations, temperature, altitude and withstand to electrical interference.

Ruggedness

Specificaties
Kenmerk Waarde
Accessory Type Cord Set
For Use With Modicon M340
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 02-12-2019, met een levertijd van 1 werkdag.
Prijs Each
49,96
(excl. BTW)
60,45
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 49,96
5 - 9
€ 48,43
10 +
€ 47,39
Related Products
ABE7CPA410 (147-578) for connection on a screw terminal ...
Description:
ABE7CPA410 (147-578) for connection on a screw terminal block of 4 current/voltage inputs of the BMXAMI0410 (147-988) analogue module, with supply of 4 isolated protected power supplies for the current loop inputs.,ABE7CPA412 (147-584) for connection on a screw terminal block ...
The counter modules for the Modicon M340 automation ...
Description:
The counter modules for the Modicon M340 automation platform are used to count the pulses generated by a sensor or to process the signals from an incremental encoder. 2-wire 24V proximity sensors3-wire 24V proximity sensors10/30V output signal incremental encoders with ...
The DIN Rail mountable Modbus Plus Super Tap ...
Description:
The DIN Rail mountable Modbus Plus Super Tap is quick and easy to install. You can pre-wire cables with screw connector blocks, which allows taps to be added quickly to previously installed networks. Compatible with all products using Modbus Plus ...
The Telefast 2 system of pre-cabling is composed ...
Description:
The Telefast 2 system of pre-cabling is composed of modules connected to the PLC by means of a multicore cable equipped with HE 10 connectors . The Telefast 2 interfaces make it possible to simplify the operation of wiring and ...