Mitsubishi Base for use with FX3 Series

  • RS-stocknr. 539-0869
  • Fabrikantnummer FX3U-232-BD
  • Fabrikant Mitsubishi
Datasheets
Wetgeving en compliance
N.v.t.
Land van herkomst: JP
Productomschrijving

Communication Modules

Six communication modules for use with FX3U PLCs. The ADP modules fit on to the left hand side of the base unit while the BD modules clip into the front left corner of the base unit. The RS232 interfaces can be used for applications such as communication with a PC, printer or bar code reader while the RS422 interfaces provide a second programming port which enables an operator panel (HMI) and a programming PC to be connected at the same time. The RS 485 interfaces allow networking of FX PLCs and a simple way of connecting to Mitsubishi inverter drives using the built-in protocol instructions. The USB BD module offers connectivity to PCs via USB for programming purposes.

Note

The ADP modules fit on the left-hand side of FX3U base units and require one of the following modules to connect to the PLC: FX3U-232-BD (539-0869), FX3U-422-BD (539-0875), FX3U-485-BD (539-0881), FX3U-USB-BD (539-0897), FX3U-CNV-BD (539-0904)
A maximum of two ADP communications modules or one ADP and one BD communications modules can be fitted at any one time to a base unit. Supply voltage is taken from PLC base unit.

Mitsubishi FX3U

FX3U CPU's are compatible with existing FX2N expansion modules as well as the new FX3U ADP expansion modules and may be used as a replacement for FX2N PLC's.

Specificaties
Kenmerk Waarde
Accessory Type Base
For Use With FX3 Series
1 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
1 op voorraad - levertijd is 1 werkdag(en) (UK-voorraad)
Prijs Each
157,95
(excl. BTW)
191,12
(incl. BTW)
Aantal stuks
Per stuk
1 - 4
€ 157,95
5 - 9
€ 151,63
10 +
€ 146,90
Related Products
Front connectors with single cores. The flexible connection ...
Description:
Front connectors with single cores. The flexible connection guarantees a fast and direct connectionfrom the input/output modules of the SIMATIC S7-300/400 to the individual elements within the cabinet. Pre-attached single cores to reduce the wiring effortThe core cross-sections of 0.5 ...
Barth PG-65 Parameter Programmer has been designed for ...
Description:
Barth PG-65 Parameter Programmer has been designed for wireless communication with the Mini-PLC STG-8xx series using IrDA or CAN interface to upload and download user-defined parameters.The STG-8xx CAN and IrDA interfaces are Open Source programmable using the powerful KEIL μVision ...
High performing Ethernet network modules for installing in ...
Description:
High performing Ethernet network modules for installing in the slots of the local rack of a Modicon Quantum PLC configuration. The front panel of each module comprises a display block, an MT-RJ connector post and a RJ45 connector port. Process ...
The Siemens SIMATIC S7 memory card is the ...
Description:
The Siemens SIMATIC S7 memory card is the 4MB flash EPROM type latest addition to the tech industry. It is used for S7-300/C7/ET 200, 3.3V NFLASH. It has a data retention of 10yrs.