Allen Bradley Interface Module for use with SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, SLC 5/05

Datasheets
Wetgeving en compliance
N.v.t.
Productomschrijving

Allen Bradley Interface Converter

The Allen Bradley interface converter is a compact device that allows a computer with a USB port to interface to DH-485 ports on SLC-500 processors for programming purposes. It features a USB port and is switch selectable between an RJ-45, RS-485 port and a 9-pin D-shell RS-232 port. This is used with SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, SLC 5/05.

Features and Benefits

• Interfaces to RSLinx using standard DF1 driver via COM port to USB redirector
• DF1 driver supports COM1-COM31
• Connects to SLC, MicroLogix, ControlLogix, and Panel View products using existing programming cables
• 12in cable for connection to a USB port
• Powered by USB port
• No external power required
• 500VDC isolation between power common and DH-485 common is 500VDC
• Three LED indicators for communication status

Specificaties
Kenmerk Waarde
Accessory Type Interface Module
For Use With SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, SLC 5/05
4 op voorraad - levertijd is 1 werkdag(en).
Prijs Each
439,43
(excl. BTW)
531,71
(incl. BTW)
Aantal stuks
Per stuk
1 +
€ 439,43
Related Products
Omron's SmartSlice I/O system is compact, intelligent and ...
Description:
Omron's SmartSlice I/O system is compact, intelligent and easy. When used with Omron's CS1/CJ1 DeviceNet master units it is plug-and-work, no configuration tool is required. By using built-in functions such as pre-scaling, totalising, differentiation and alarming in analog I/O units, ...
The counter modules for the Modicon M340 automation ...
Description:
The counter modules for the Modicon M340 automation platform are used to count the pulses generated by a sensor or to process the signals from an incremental encoder. 2-wire 24V proximity sensors3-wire 24V proximity sensors10/30V output signal incremental encoders with ...
Module for direct connection of actuator or sensor ...
Description:
Module for direct connection of actuator or sensor signal lines.Direct connection to the ribbon cable by male connector in accordance with IEC 603 1/DIN 41 651.Screw terminal for sensor and actuator connections.Label holder for module identification.DIN rail fitting.
Range of couplers for analogue and digital signals.Enables ...
Description:
Range of couplers for analogue and digital signals.Enables I/O connection to various protocols Modbus, Ethernet, Profibus and Interbus.Configuration simplified with switches or rotary encoders.The joint should be connected to the end of the loop, to guarantee correct transmission of the ...