Mitsubishi PLC Expansion Module for Use with FX2N Series, Analogue, Digital
- RS-stocknr.:
- 781-6919
- Fabrikantnummer:
- FX2N-2AD
- Fabrikant:
- Mitsubishi
2 op voorraad - levertijd is 1 werkdag(en) (EU-voorraad)
2 op voorraad - levertijd is 3 à 5 werkdagen (UK-voorraad)
Toegevoegd
Prijs Per stuk
€ 246,55
(excl. BTW)
€ 298,33
(incl. BTW)
| Aantal stuks | Per stuk |
| 1 + | € 246,55 |
- RS-stocknr.:
- 781-6919
- Fabrikantnummer:
- FX2N-2AD
- Fabrikant:
- Mitsubishi
Datasheets
Wetgeving en compliance
- Land van herkomst:
- JP
Productomschrijving
Analogue Input Module
The FX2N-2xD module with analog input is used to convert the analog input into a digital value of 12 bits, and to forward the values to the PLC controller.
FX2N-xAD can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
FX2N-xAD can be connected with FX0N, FX2N, and the FX2NC series Programmable controllers.
Voltage and current input
A/D conversion characteristics can be adjust
A/D conversion characteristics can be adjust
Additional Modules for Mitsubishi FX1S, FX1N & FX2N PLC's
Products in this range are for use with FX1S, FX1N and FX2N PLC, unless specified otherwise. All are DIN rail mount and are 90mm high and 87mm deep. The width varies and is tabled below.
All of the following products, except the Extension Cable, attach directly to the right hand end of the previous unit, block or module using the short integral lead.
Specificaties
Kenmerk | Waarde |
|---|---|
| Accessory Type | PLC Expansion Module |
| Input Type | Analogue |
| Number of Inputs | 2 |
| Number of Outputs | 2 |
| Output Type | Digital |
| For Use With | FX2N Series |
| Dimensions | 90 x 43 x 87 mm |
- RS-stocknr.:
- 781-6919
- Fabrikantnummer:
- FX2N-2AD
- Fabrikant:
- Mitsubishi